Dan's mk2 8v to ABF project **Build For Le Mans??**

[tech1889]

Can you get a pic of the front of the power steering pump and bracket please ? I'm going to move the bracket for better access..

The m/c is off a SEAT cupra might be the turbo one not sure.. £30 on eBay with adaptor as you need adaptor to fit mk2/3 servo

[tech1889]

SEAT ibiza cupra that m/c just checked 

Just got in from a late shift to a little goodie.. Brand new genuine HELLA rad for the pricely sum of £29 cant beat that !

[earlymk2]

Can you get a pic of the front of the power steering pump and bracket please ? I'm going to move the bracket for better access..

The m/c is off a SEAT cupra might be the turbo one not sure.. £30 on eBay with adaptor as you need adaptor to fit mk2/3 servo

Nice one thanks very much.

[jmsheahan]

Can you get a pic of the front of the power steering pump and bracket please ? I'm going to move the bracket for better access..

Sorry bud I completely forgot to do this, will try grab a pic up the garage tomorrow.

[tech1889]

Cheers mate

[tech1889]

256mm front brake setup fitted ready to go 280 when im ready.. got two new flexi lines delivered but think they the wrong ones  time to order up soon

[tshirt2k]

Pics?

Did they go on ok?

[tech1889]

Yer went on a treat mate.. i soaked the mk2 track rods with plusgas and used stilsens and they came off a treat.. only problem is on the track roads my track rod ends are about 20mm further out each side and not held on with a lot.. does this mean i need a mk3 rack ?? also i need tdi shafts

[tshirt2k]

Did you use the mk3 track rod ends ? As long as there's a good few threads going into them they should be ok.

Yea I think you'll need shafts. Mine went with the engine and box.

[tech1889]

yer they are on about 4 full turns it just worries me as the mk2 items went on another 20mm i dont want these coming loose.. im sure tdi shafts will be cheap as chips down a scrappy or ebay.. will get pics soon of the brakes.. still waiting on my friend to run my lines..


Corrado pedal box and master cylinder on route all i need is line from master to slave and master to reserviour..