under boost issues...here we go again!

[blade4real2004]

they look like they are linked to you replacing the lambda? You tried clearing them and seeing if they come back?

yer i cleared them when i changed the turbo over but it come back again i think it went into limp mode  earlier to as it wouldnt boost past 10psi but now i cleared it its boosting to 20psi again

[blade4real2004]

Has it been mapped to suit? If not do that first. 

i was thinking that earlier on but so i tried getting hold of nick but no luck yet 

[Chris.]

What turbo did you have on before?

[blade4real2004]

k03-052 (k03s) stage 2 rtech but it not custom nick come down and loaded it on which he dont do no more..

i boost leak tested it to had a slight leak on the one pipe on the n75 and on the tip on the turbo so sorted them will see if that has sorted it

i also cleaned off a load of sensors lambda sensor intake sensor throttle body

im wondering if with the k04 now on there and the injectors on there limit on a stage 2 k03s setup now with the k04 it cant cope

i would guess nick would know if that could be my problem

[blade4real2004]

lambda changed again cleared code just need to run it again now see it it comes back fingers crossed it was just a dodgey lambda

[coolio]

k03-052 (k03s) stage 2 rtech but it not custom nick come down and loaded it on which he dont do no more..

i boost leak tested it to had a slight leak on the one pipe on the n75 and on the tip on the turbo so sorted them will see if that has sorted it

i also cleaned off a load of sensors lambda sensor intake sensor throttle body

im wondering if with the k04 now on there and the injectors on there limit on a stage 2 k03s setup now with the k04 it cant cope

i would guess nick would know if that could be my problem

my car have developed an under boost issue and when i plant my foot down it goes into limp mode , just wondering what equipment did u use to do the leak test ??

[blade4real2004]

i bought a boost leak tester from the US mate is a good bit of kit awesome way to find leaks never would of found the two i had without it

[coolio]

i bought a boost leak tester from the US mate is a good bit of kit awesome way to find leaks never would of found the two i had without it

u got  link for it mate ?

[tshirt2k]

You dont need to buy a kit. a few plumbing bits and a shrader valve does the trick (And a compressor with tyre inflater). You just need a end cap that fits in where your maf connects to the TIP.

[blade4real2004]

You dont need to buy a kit. a few plumbing bits and a shrader valve does the trick (And a compressor with tyre inflater). You just need a end cap that fits in where your maf connects to the TIP.

i thought of doing that but i just thought for the price of the kit it saved me the hassle