Just a few questions regarding wheels...

[Optimus Wol]

basically, i wanna go for 16"x9j. whats the best offset for the mk2's?? and anybody running on 9j rims on here? any problems?

and before i go, whats the PCD for a mk2 16v on a H plate? 4 stud before i forget. cheers people, much obligided 

[takethefifth]

Hi, PCD is 4x100 and you will need some arch work though not done it myself.  Not sure what offset would be best on those wheels, stock is somewhere around 35 i think...

[Optimus Wol]

cheers mate. just so im sure, if its a smaller ET number, its more offset aint it? cant remember. aint done it since college............   

[takethefifth]

Yep, ET measured in millimetres and the lower it is, the further the wheel sticks out. 

[...joe]

^^^ a wheel with an et of 5 (for example) will stick out loads and one of 50 will stick in. 9x16's will definately needs ome sort of arch work unless you're planning on leaving it stock ride height... which would look sh!tter than sh!t!
i've got 8.5x15's with a low drop and had to have alot of chopping done!

[topher]

9" wheels should have an offset of 15mm if i remember rightly to avoid collisions on the inside of the wheel.
Mine are 9x16 with a pretty substantial drop and stretched/low profile tyres.. still rubs occasionally, and thats with rallye arches. Get yer tinsnips out

[VR6_ROB]

so if i get borbet type A 9x16 ive go tot do a lot of arch work
or could i get spacers so they sit further out

[Judderi]

Further out would make it worse cos thats where the arches are.

[Organisys]

Surely at 9" wide you are going to need some arch work regardless of ride height and offset, wont the tread of the tyre be just out of the arch? either that or he is gonna need a big stretch on the rubber.

[Judderi]

i agree. for the hastle id say its not wort it and go for a different size.