20vt mounts 4 a mk1

[foxy mk1]

hi guys im new 2 the site & wonderd if there is anywhere i can get mounts 4 20v converion thnx 

[mk1]

Is this for mounting the gear box?.
Steve.

[foxy mk1]

hi mate, no its the o/s mount as i am using the standard box

[benmk1]

Hopefully you don't mean the standard mk1 box!

[foxy mk1]

sorry not been in touch, was working away, y not use standard box

[foxy mk1]

benmk1 pls ring me 07838169703 thnx

[benmk1]

Sorry mate didn't think that the rod box was compatable, done some further investigating and it can be used highly :embarassed: don't listen to fools like me who haven't done such converstions. I sure you've looked into this conversion, and whats required, i just thought that the box had to be cable change and couldn't cope with nearly or double the power (depending on engine spec obv)
Again I sorry to have caused concern, there's loads of converion help on here, just not from me!  :embarassed:

However what with the know diff pin failure from the 020 box i'd stongly recomend and upgrade!!

This fella is using a seat ibiza 16v box, handy links:

 http://www.vwgolfmk1.org.uk/modules.php?name=Forums&file=viewtopic&t=4534&postdays=0&postorder=asc&start=10

http://www.pajalle.com/cars.php?id=021&lang=en

[Dizzie]

the standard 020 'box will take 190-200bhp before it lets go. The conversion to 02A is fairly straight forward and will handle the increase in power.

[Dizzie]

you will need to have a custom mount made up in order to mount the 02A box to the mk1 mount. Not sure if these parts are on the shelf as I haven't researched it myself

[pitchy]

i can quite happily provide the mount if you could get me all dimensions etc , if theres enough info i can have it done in a few days . give us a shout if your interested .