Silicone tip "nipple"

[150+]

Just got my silicone tip and noticed while reading thru the guide I found on fitting one that the metal nipple for the vacuum isn't there!! Do indeed it??

It's on a AUM ko3s

Cheers

[jamie16v]

where by is it?. if its right by the turbo end it`ll be for the charcoal canister evap pipe. can be blocked off if you do a evap delete.

[150+]

In the first pic top left and bottom right

http://www.ottawa-vdubbing.com/forums/phpBB3/viewtopic.php?f=22&t=8651

[rfn_hodgson]

this one you mean mate??

[150+]

 

[150+]

If the one at the top is just blanked off I can sort that  but the one at the bottom, is that just a small piece of tube so that you can put a jubilee clip round the vacuum hose to hold it there???

[150+]

this one you mean mate??

Yes mate that's the one

[150+]

Anyone  wanted to fit it tonight, pinched a couple of valves from the spray gun spares box at work I have one that fits the feed at the turbo end so if its just something to hold the vacuum hose to I will crack on with it!!!

Sould I use something to "glue" the valve or just use one that's a nice tight fit???

[jamie16v]

you can cut a bit of rubber pipe to make a coupler and put a tight fitting bolt into it as a temporary fix  .
then use one of these Silicone Blanking Caps when you get it 

[150+]

Cheers Jamie

What about the other can I fit a a valve I've pinched from work and how would I make it secure??