data logging, now looking good!

[jamie16v]

Sorry to hi-jack.
I have the exact same set up and I can not connect to the engine part. I know the cable works because I connected to the radio and a couple of other things, but not the engine.
Any ideas as to why ?

there seems to be alot of issues with the cheap vag com leads not connecting to ECU`s. mine is a cheapo but its an old cheapo.
try going into the options screen of vag com, set the baud setting to 9600 then click apply, see if that works

[Wazzzer]

Splendid mate. What sort of boost are you running? Very rough guess of 234bhp

[jamie16v]

i think i`m peaking at about 22psi and tailing off to err.. i dunno .. or at least i was before i fitted the cat, i don`t really spend much time looking at the boost guage to be honest..lol 

[jamie16v]

isn't 188g/s the limit of the maf?.. and in that case, isn't that what is not bottle necking my power 

[dom]

188g/s is roughly 235bhp so I'd guess you'd be getting close. You running a ko3s?

[jamie16v]

no mate, k04 in a k03 shell

[Wazzzer]

Time for a VR6 MAF and Calibra yellows then

[jamie16v]

Time for a VR6 MAF and Calibra yellows then

they are sitting in a pretty little box in the back of the car, need to sell my arse first though so I can afford the custom mapping.

[dom]

no mate, k04 in a k03 shell

Should hit good power with MAF and injectors mapped in then

[barrym381]

Time for a VR6 MAF and Calibra yellows then

they are sitting in a pretty little box in the back of the car, need to sell my arse first though so I can afford the custom mapping.

would you get that much for your arse