« previous next »
Pages: [1] 2

Author Topic: engine bay and inlet manifold very hot  (Read 2526 times)

Offline markgti1.8t

  • Here all the time
  • ****
  • Posts: 366
engine bay and inlet manifold very hot
« on: 09 May 2013, 20:29 »
hi

was driving the car today and the inlet manifold get very hot with a big fmic on y is this thanks
Logged

AGU fk coilovers Powerflex top mounts full 3inch decat turbo back viper induction kit fmic vr6 clutch g60 flywheel catch can 007 forge dv Power flex wishbone bushes  Power flex dog mount under brace JOM  ADJUSTABLE Drop Links Walbro 255lph INLINE Fuel Pump wmi now fitted WAITING TO FIT VR6 MAF SAAB RED TOP INJECTORS STILL TO BUY K300 TURBO  CON RODS LSD

Offline markgti1.8t

  • Here all the time
  • ****
  • Posts: 366
Re: engine bay and inlet manifold very hot
« Reply #1 on: 09 May 2013, 20:44 »
going to try my maf tomorrow
Logged

AGU fk coilovers Powerflex top mounts full 3inch decat turbo back viper induction kit fmic vr6 clutch g60 flywheel catch can 007 forge dv Power flex wishbone bushes  Power flex dog mount under brace JOM  ADJUSTABLE Drop Links Walbro 255lph INLINE Fuel Pump wmi now fitted WAITING TO FIT VR6 MAF SAAB RED TOP INJECTORS STILL TO BUY K300 TURBO  CON RODS LSD

Offline asboGTI

  • I live here
  • *****
  • Posts: 678
Re: engine bay and inlet manifold very hot
« Reply #2 on: 10 May 2013, 07:43 »
Go on vagcom see what inlet temps its got
Logged
vw golf mk4 ARZ 1.8T pipercross panel filter, xenon headlights, JOMS coilovers, forge 007p with green spring, audi tt anti roll bar, 3inch ebay trubo back exhaust, COOKIES MONSTER STICKER(adds bhp I swear)

Offline markgti1.8t

  • Here all the time
  • ****
  • Posts: 366
Re: engine bay and inlet manifold very hot
« Reply #3 on: 10 May 2013, 21:42 »
tried the maf still the same anyone got any ideas thanks
Logged

AGU fk coilovers Powerflex top mounts full 3inch decat turbo back viper induction kit fmic vr6 clutch g60 flywheel catch can 007 forge dv Power flex wishbone bushes  Power flex dog mount under brace JOM  ADJUSTABLE Drop Links Walbro 255lph INLINE Fuel Pump wmi now fitted WAITING TO FIT VR6 MAF SAAB RED TOP INJECTORS STILL TO BUY K300 TURBO  CON RODS LSD

jamie16v

  • Guest
Re: engine bay and inlet manifold very hot
« Reply #4 on: 11 May 2013, 14:00 »
what sort of driving were you doing?.. stuck in traffic, fast moving with plenty of airflow through the front grill?..
Logged

Offline markgti1.8t

  • Here all the time
  • ****
  • Posts: 366
Re: engine bay and inlet manifold very hot
« Reply #5 on: 11 May 2013, 14:26 »
Quote from: jamie16v on 11 May 2013, 14:00
what sort of driving were you doing?.. stuck in traffic, fast moving with plenty of airflow through the front grill?..

all the above
Logged

AGU fk coilovers Powerflex top mounts full 3inch decat turbo back viper induction kit fmic vr6 clutch g60 flywheel catch can 007 forge dv Power flex wishbone bushes  Power flex dog mount under brace JOM  ADJUSTABLE Drop Links Walbro 255lph INLINE Fuel Pump wmi now fitted WAITING TO FIT VR6 MAF SAAB RED TOP INJECTORS STILL TO BUY K300 TURBO  CON RODS LSD

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: engine bay and inlet manifold very hot
« Reply #6 on: 12 May 2013, 16:19 »
heat tranfer off of the engine.
Logged
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline rio_gti

  • I live here
  • *****
  • Posts: 2,298
  • "i'm not spending any money on it" Got a Hybrid!
Re: engine bay and inlet manifold very hot
« Reply #7 on: 12 May 2013, 17:05 »
Logged


2000 GTI 1.8t ARZ, S2000 filter, DSG intake, Forge 007 dv, Catch can, R-tech custom remap, 3" Supersize Silicone TIP, Powerflex dog bone, 'The Beast' FMIC, Ultimate delete, LCR fuel pump, 3" Turbo back, K03 hybrid, Ported Manifold, S3 injectors, 80mm maf = 280bhp 270lbft :evil:

Offline Chris#101

  • I live here
  • *****
  • Posts: 827
Re: engine bay and inlet manifold very hot
« Reply #8 on: 12 May 2013, 18:26 »
WMI will cure your problem  :wink:

Weirdest feeling ever when you go for a hard heavy right foot session to feel the inlet manifold after and it's ice cold to touch  :huh:
Logged


          2003 1.8T: R-tech Live Cutom Stage 2 remap: N249 Bypass : Forge T.I.P : Forge 007p  : Forge Actuator, yellow spring : Toyosports F.M.I.C : Toyosports C.A.I :                                                                   PCV simplified - oil catch can : 42' Draft 3" turbo back non res exhaust system : Devils own W.M.I : 231bhp & 258lbs-ft

Offline markgti1.8t

  • Here all the time
  • ****
  • Posts: 366
Re: engine bay and inlet manifold very hot
« Reply #9 on: 13 May 2013, 01:14 »
Quote from: rio_gti on 12 May 2013, 17:05
Quote from: james2 on 12 May 2013, 16:19
heat tranfer off of the engine.

This... You need one of these

http://www.esetuning.com/New-South-Performance-Small-Port-1-8T-Power-Gasket-p/gas-005.htm

yous thinks this would be needed as i will be getting wmi kit soon
Logged

AGU fk coilovers Powerflex top mounts full 3inch decat turbo back viper induction kit fmic vr6 clutch g60 flywheel catch can 007 forge dv Power flex wishbone bushes  Power flex dog mount under brace JOM  ADJUSTABLE Drop Links Walbro 255lph INLINE Fuel Pump wmi now fitted WAITING TO FIT VR6 MAF SAAB RED TOP INJECTORS STILL TO BUY K300 TURBO  CON RODS LSD
Pages: [1] 2
« previous next »