Author Topic: Help: ASZ turbo does not fit my ASZ engine?  (Read 3233 times)

Offline VW_UK

  • GTI forum regular
  • ***
  • Posts: 191
  • 2000 (X) Mk4 TDI S for sale. £2250
Help: ASZ turbo does not fit my ASZ engine?
« on: 29 December 2012, 17:38 »
Ok, a bit confused. I've read a number of times that a ASZ 130 tdi turbo would fit to an Ibiza/ golf/ A3 however I have bought one recently but seems to have a different outlet position to the one that's been removed:

One removed: notice the outlet (where turbo pipe fits) top left



ASZ replacement: outlet top right



Can someone enlighten me please? Is one of them not an ASZ or there different types?

Offline rio_gti

  • I live here
  • *****
  • Posts: 2,298
  • "i'm not spending any money on it" Got a Hybrid!
Re: Help: ASZ turbo does not fit my ASZ engine?
« Reply #1 on: 29 December 2012, 17:41 »
Can you not just undo the bolts and rotate it??


2000 GTI 1.8t ARZ, S2000 filter, DSG intake, Forge 007 dv, Catch can, R-tech custom remap, 3" Supersize Silicone TIP, Powerflex dog bone, 'The Beast' FMIC, Ultimate delete, LCR fuel pump, 3" Turbo back, K03 hybrid, Ported Manifold, S3 injectors, 80mm maf = 280bhp 270lbft :evil:

Offline VW_UK

  • GTI forum regular
  • ***
  • Posts: 191
  • 2000 (X) Mk4 TDI S for sale. £2250
Re: Help: ASZ turbo does not fit my ASZ engine?
« Reply #2 on: 29 December 2012, 17:44 »
Can you not just undo the bolts and rotate it??

Ok silly question, but would it be as simple as that?

Would I need to change any gaskets etc?

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,172
  • Golf GTI 1.8T AGU
Re: Help: ASZ turbo does not fit my ASZ engine?
« Reply #3 on: 29 December 2012, 20:27 »
no you won't need to change gaskets to do it. As Rio says it look like the compressor housing has been rotated for some reason


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline VW_UK

  • GTI forum regular
  • ***
  • Posts: 191
  • 2000 (X) Mk4 TDI S for sale. £2250
Re: Help: ASZ turbo does not fit my ASZ engine?
« Reply #4 on: 29 December 2012, 20:43 »
Had a quick look and not sure which bolts to remove to rotate it...? :(

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,172
  • Golf GTI 1.8T AGU
Re: Help: ASZ turbo does not fit my ASZ engine?
« Reply #5 on: 29 December 2012, 21:01 »
get some pics of the back of the compressor housing and I'll see if I can point them out


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline beppe2672

  • Here all the time
  • ****
  • Posts: 385
Re: Help: ASZ turbo does not fit my ASZ engine?
« Reply #6 on: 29 December 2012, 21:02 »
If you have a look at the back of the compressor side you'll see 6 bolt with large washers on them, loosen these and you should be able to gently turn the compressor into the correct position, then tighten them back up of course!
1999 1.8t AGU, KNN Panel filter, Smoothed air box, Custom CAI, Forge 007 dv, REVO stage 1, 3" eBay TBE. Audi TT quickrack.

To come - A DIY hybrid K03 and a whole lot of supporting mods!

Offline VW_UK

  • GTI forum regular
  • ***
  • Posts: 191
  • 2000 (X) Mk4 TDI S for sale. £2250
Re: Help: ASZ turbo does not fit my ASZ engine?
« Reply #7 on: 29 December 2012, 22:25 »
Not the greatest pic I know but only one I have on my phone.

Bolts on left or right in the pic?


Offline beppe2672

  • Here all the time
  • ****
  • Posts: 385
Re: Help: ASZ turbo does not fit my ASZ engine?
« Reply #8 on: 29 December 2012, 23:07 »
if all the oil lines and stuff line up ok just the bolts on the right.
1999 1.8t AGU, KNN Panel filter, Smoothed air box, Custom CAI, Forge 007 dv, REVO stage 1, 3" eBay TBE. Audi TT quickrack.

To come - A DIY hybrid K03 and a whole lot of supporting mods!

Offline VW_UK

  • GTI forum regular
  • ***
  • Posts: 191
  • 2000 (X) Mk4 TDI S for sale. £2250
Re: Help: ASZ turbo does not fit my ASZ engine?
« Reply #9 on: 29 December 2012, 23:22 »
if all the oil lines and stuff line up ok just the bolts on the right.

Yes they seem to line up all ok. Will double check again but this was the only difference I noticed.