« previous next »
Pages: [1] 2

Author Topic: MAF question?  (Read 1696 times)

Offline markallen

  • Here all the time
  • ****
  • Posts: 409
  • AUM 1.8 20v Turbo 150bhp for now ;)
MAF question?
« on: 18 December 2012, 11:03 »
Hi having change the camshaft position sensor for a pricey sum of £74 with no shown improvements!!  :angry: I will now be moving on to the MAF, what I want to know is do I have to completely remove the MAF to test it, or can I just unplug it and go for a drive around the block? Cheers  :smiley:
Logged
Golf Mk4 GTi Turbo, R32 front bumper, Lowered on ProSport Coilovers, Bora illuminated vents, Armrest, Heko wind deflectors, Aluminium vinyl trim.

Soon to be added, FMIC, 3" exhaust, Remap..oh and new turbo :(

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: MAF question?
« Reply #1 on: 18 December 2012, 11:05 »
Just unplug it thats how we tested ours. My new maf here today
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back

Offline markallen

  • Here all the time
  • ****
  • Posts: 409
  • AUM 1.8 20v Turbo 150bhp for now ;)
Re: MAF question?
« Reply #2 on: 18 December 2012, 11:06 »
Thanks mate. Did you have a rough idle at around 800rpm? When I increase it to about 1200rpm it seems to be fine?
Logged
Golf Mk4 GTi Turbo, R32 front bumper, Lowered on ProSport Coilovers, Bora illuminated vents, Armrest, Heko wind deflectors, Aluminium vinyl trim.

Soon to be added, FMIC, 3" exhaust, Remap..oh and new turbo :(

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: MAF question?
« Reply #3 on: 18 December 2012, 12:15 »
Under heavy load it would be hesitent and mis abit idle seemed fine
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back

Offline markallen

  • Here all the time
  • ****
  • Posts: 409
  • AUM 1.8 20v Turbo 150bhp for now ;)
Re: MAF question?
« Reply #4 on: 18 December 2012, 17:24 »
Mines the other way round ha ha. But it's defo the MAF as its fine when unplugged. The dealer wanted £120 for exchange! I've read that people paid £65 for there's? Do you get the full sensor ie the round plastic tube too? Or is it just the screw in part?
Logged
Golf Mk4 GTi Turbo, R32 front bumper, Lowered on ProSport Coilovers, Bora illuminated vents, Armrest, Heko wind deflectors, Aluminium vinyl trim.

Soon to be added, FMIC, 3" exhaust, Remap..oh and new turbo :(

Offline Tezmax

  • GTI forum regular
  • ***
  • Posts: 226
Re: MAF question?
« Reply #5 on: 18 December 2012, 17:42 »
Its the whole lot mate
Logged


1.8t Aum. forge 007p. 17" bbs. R-tech stage 1 map.205/235. catch can.

Offline markallen

  • Here all the time
  • ****
  • Posts: 409
  • AUM 1.8 20v Turbo 150bhp for now ;)
Re: MAF question?
« Reply #6 on: 18 December 2012, 17:57 »
I will get in touch with a friend who works a euro car parts then :) ha ha
Logged
Golf Mk4 GTi Turbo, R32 front bumper, Lowered on ProSport Coilovers, Bora illuminated vents, Armrest, Heko wind deflectors, Aluminium vinyl trim.

Soon to be added, FMIC, 3" exhaust, Remap..oh and new turbo :(

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: MAF question?
« Reply #7 on: 18 December 2012, 19:14 »
Quote from: markallen on 18 December 2012, 17:57
I will get in touch with a friend who works a euro car parts then :) ha ha

Dont!

Get a genuine VW one....all others are crap! I got a bosch one from GSF & it only lasted 9 months :sad:
Logged

Offline markallen

  • Here all the time
  • ****
  • Posts: 409
  • AUM 1.8 20v Turbo 150bhp for now ;)
Re: MAF question?
« Reply #8 on: 18 December 2012, 19:33 »
VW ones are Bosch?
Logged
Golf Mk4 GTi Turbo, R32 front bumper, Lowered on ProSport Coilovers, Bora illuminated vents, Armrest, Heko wind deflectors, Aluminium vinyl trim.

Soon to be added, FMIC, 3" exhaust, Remap..oh and new turbo :(

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: MAF question?
« Reply #9 on: 18 December 2012, 19:39 »
my new maf arrived today (bosch) genuine VW and fitted cured issues straight away. low voltage issue was the error and was running in limp mode and bringing tc issues on.
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back
Pages: [1] 2
« previous next »