« previous next »
Pages: 1 [2] 3 4

Author Topic: How much will a AGU take?  (Read 4132 times)

Offline jamie1989

  • I live here
  • *****
  • Posts: 1,174
Re: How much will a AGU take?
« Reply #10 on: 17 August 2012, 11:12 »
Thats 300lbs of torque out of window then!
Im back up Wednesday with Nick on my stage 2 custom AGU k03s.
I want around 245-250bhp and around 260-280lbs based on this thread.
Logged
1.6-1.8t AGU K03s, Forge actuator, Forge 007p, turbo back exhuast, Ths front mount, Catch can, 5 piece silicone boost pipes and creation sports tip. Stage 2 atm 232bhp 270lbs. Waiting for custom mapping :-)

Offline Chris#101

  • I live here
  • *****
  • Posts: 827
Re: How much will a AGU take?
« Reply #11 on: 17 August 2012, 12:38 »
Quote from: jamie1989 on 17 August 2012, 11:12
Thats 300lbs of torque out of window then!
Im back up Wednesday with Nick on my stage 2 custom AGU k03s.
I want around 245-250bhp and around 260-280lbs based on this thread.


from a k03s ? :lipsrsealed:
Logged


          2003 1.8T: R-tech Live Cutom Stage 2 remap: N249 Bypass : Forge T.I.P : Forge 007p  : Forge Actuator, yellow spring : Toyosports F.M.I.C : Toyosports C.A.I :                                                                   PCV simplified - oil catch can : 42' Draft 3" turbo back non res exhaust system : Devils own W.M.I : 231bhp & 258lbs-ft

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: How much will a AGU take?
« Reply #12 on: 17 August 2012, 12:42 »
Quote from: Chris#101 on 17 August 2012, 12:38
Quote from: jamie1989 on 17 August 2012, 11:12
Thats 300lbs of torque out of window then!
Im back up Wednesday with Nick on my stage 2 custom AGU k03s.
I want around 245-250bhp and around 260-280lbs based on this thread.


from a k03s ? :lipsrsealed:

That's a tad optimistic :grin:
Logged

Offline jamie1989

  • I live here
  • *****
  • Posts: 1,174
Re: How much will a AGU take?
« Reply #13 on: 17 August 2012, 12:53 »
We will see.
Its not just from a K03s  :wink: and WITHOUT water meth.

Its a custom map.
Logged
1.6-1.8t AGU K03s, Forge actuator, Forge 007p, turbo back exhuast, Ths front mount, Catch can, 5 piece silicone boost pipes and creation sports tip. Stage 2 atm 232bhp 270lbs. Waiting for custom mapping :-)

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: How much will a AGU take?
« Reply #14 on: 17 August 2012, 12:58 »
Quote from: jamie1989 on 17 August 2012, 12:53
We will see.
Its not just from a K03s  :wink: and WITHOUT water meth.

Its a custom map.

No matter what supporting mods your adding, the turbo will be the limiting factor and you'll struggle to see the figures you've quoted with a KO3s :undecided:
Logged

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: How much will a AGU take?
« Reply #15 on: 17 August 2012, 12:59 »
with supporting mods you are right on the limit of the turbo at those figures
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline jamie1989

  • I live here
  • *****
  • Posts: 1,174
Re: How much will a AGU take?
« Reply #16 on: 17 August 2012, 13:00 »
Same turbo same spec as what I have is running 260bhp with Nick when I was there, He actually took me in it.
The only difference is hes got WMI.

Chris on here was runnning the exact same spec (I dunno what exhaust) but running 248bhp 270lbs+?

Im not saying I will get these figures but I hope to be close as.
Logged
1.6-1.8t AGU K03s, Forge actuator, Forge 007p, turbo back exhuast, Ths front mount, Catch can, 5 piece silicone boost pipes and creation sports tip. Stage 2 atm 232bhp 270lbs. Waiting for custom mapping :-)

Offline jamie1989

  • I live here
  • *****
  • Posts: 1,174
Re: How much will a AGU take?
« Reply #17 on: 17 August 2012, 13:05 »
Heres Chris's hope he doesnt mind

248bhp  278lbft R - Tech Powered 1.8T!!  - Gone but NOT forgotton
Logged
1.6-1.8t AGU K03s, Forge actuator, Forge 007p, turbo back exhuast, Ths front mount, Catch can, 5 piece silicone boost pipes and creation sports tip. Stage 2 atm 232bhp 270lbs. Waiting for custom mapping :-)

Offline Prawny

  • Here all the time
  • ****
  • Posts: 456
  • R-tech power!!!
Re: How much will a AGU take?
« Reply #18 on: 17 August 2012, 13:14 »
These cars are exceptional though, and not the norm. the 260bhp one you speak of is TingTongs, he works there, and the WMI allows LOADS of timing to be added. Special cars indeed compared to those you drive around in every day.

Also, a ko3S at 250bhp won't last very long at all.

Sensible figures are 230-235bhp and 270lbft, they can produce this year in year out and don't fall apart. Anything more than that and you've created a time bomb.
Logged

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: How much will a AGU take?
« Reply #19 on: 17 August 2012, 13:19 »
Quote from: Prawny on 17 August 2012, 13:14
These cars are exceptional though, and not the norm. the 260bhp one you speak of is TingTongs, he works there, and the WMI allows LOADS of timing to be added. Special cars indeed compared to those you drive around in every day.

Also, a ko3S at 250bhp won't last very long at all.

Sensible figures are 230-235bhp and 270lbft, they can produce this year in year out and don't fall apart. Anything more than that and you've created a time bomb.

[/thread]
Logged
Pages: 1 [2] 3 4
« previous next »