« previous next »
Pages: 1 2 [3] 4 5

Author Topic: SORTED!! whine noise from induction?  (Read 12700 times)

Offline Giro

  • Not said much yet
  • **
  • Posts: 51
Re: HELP whine noise from induction?
« Reply #20 on: 25 July 2012, 18:59 »
Quote from: Dalo Harkin on 25 July 2012, 07:30
How much  :sick:
feck me, should have posted in the wanted loads of people dont run them now with catch cans installed.

Anyone have a puck for this guy .........

gutted never gave it a thought just rushed out to try and fix it asap

and the part doesn't solve the problem  :cry:

tryed the new puck and i can blow both ways so i fitted it and its made no difference

if i take the boost controler plug off the noise is quieter but theres no boost

so its boost related

few mechanics have checked the car and they are puzzled they gess to fit a new turbo but im not convinced  :undecided: :sick:

anyone help?
« Last Edit: 25 July 2012, 19:03 by Giro »
Logged

Offline Giro

  • Not said much yet
  • **
  • Posts: 51
Re: HELP whine noise from induction?
« Reply #21 on: 25 July 2012, 21:53 »
cars a way for a smoke test tomorrow
ill keep you in formed with the news
might get a manual water boost gauge fitted to check how its boosting  :sad:
Logged

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,172
  • Golf GTI 1.8T AGU
Re: HELP whine noise from induction?
« Reply #22 on: 25 July 2012, 22:34 »
get the TIP off at the turbo end and see if you can wiggle the shaft about at all
Logged


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline Giro

  • Not said much yet
  • **
  • Posts: 51
Re: HELP whine noise from induction?
« Reply #23 on: 26 July 2012, 18:35 »
Quote from: Wazzzer on 25 July 2012, 22:34
get the TIP off at the turbo end and see if you can wiggle the shaft about at all
im not sure how to get it off?

ive had the car for a smoke test today and no leaks

time for a new turbo :(

i was told today that the AUQ engine has a ko3s turbo is this right?
Logged

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,172
  • Golf GTI 1.8T AGU
Re: HELP whine noise from induction?
« Reply #24 on: 26 July 2012, 18:59 »
you just need to pop it off where it joins to the inlet on the turbo, best done from under the car. My guess from the noise is worn bearings which will mean your compressor wheel will move in/out and side to side. The noise is generated as it is out of balance

Yes the AUQ has a K03s
Logged


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline Giro

  • Not said much yet
  • **
  • Posts: 51
Re: HELP whine noise from induction?
« Reply #25 on: 26 July 2012, 21:54 »
Quote from: Wazzzer on 26 July 2012, 18:59
you just need to pop it off where it joins to the inlet on the turbo, best done from under the car. My guess from the noise is worn bearings which will mean your compressor wheel will move in/out and side to side. The noise is generated as it is out of balance

Yes the AUQ has a K03s

could i get it repaired/serviced ?

or buy a recon??
Logged

Offline pickles

  • I live here
  • *****
  • Posts: 769
  • Next!!!
Re: HELP whine noise from induction?
« Reply #26 on: 27 July 2012, 09:21 »
upgrade time  :laugh: upgrade time :) £££
Logged
weirdos on here i tell you ;)
mk4 golf 1.8T, AGU, CAI, Forge007p DV,TIP,Decat, Bilsteins with Koni springs dropped 40mm
Mapped

Nearly S3 time  :)

Offline Giro

  • Not said much yet
  • **
  • Posts: 51
Re: HELP whine noise from induction?
« Reply #27 on: 27 July 2012, 18:40 »
Quote from: pickles on 27 July 2012, 09:21
upgrade time  :laugh: upgrade time :) £££
ha i would if i was minted  :rolleyes:
i might have about £300 to spend if im lucky
Logged

Offline jamie1989

  • I live here
  • *****
  • Posts: 1,174
Re: HELP whine noise from induction?
« Reply #28 on: 27 July 2012, 18:48 »
Thats plenty mate,

Mine made this noise when I fitted the k03s to my AGU, Turned out the pancake pipe weren connected tidy and blew the pipe off lol Quick fix for though.

It could be soo many diff things, Just take the turbo intake pipe off and check the shaft yourself its a 5min job literally.
Logged
1.6-1.8t AGU K03s, Forge actuator, Forge 007p, turbo back exhuast, Ths front mount, Catch can, 5 piece silicone boost pipes and creation sports tip. Stage 2 atm 232bhp 270lbs. Waiting for custom mapping :-)

Offline Giro

  • Not said much yet
  • **
  • Posts: 51
Re: HELP whine noise from induction?
« Reply #29 on: 28 July 2012, 09:09 »
Quote from: jamie1989 on 27 July 2012, 18:48
Thats plenty mate,

Mine made this noise when I fitted the k03s to my AGU, Turned out the pancake pipe weren connected tidy and blew the pipe off lol Quick fix for though.

It could be soo many diff things, Just take the turbo intake pipe off and check the shaft yourself its a 5min job literally.

i will try this and get back to you

whats the pancake pipe?
Logged
Pages: 1 2 [3] 4 5
« previous next »