Author Topic: egr blank plates???? (Read 4174 times)

coxy1980_123 · « **on:** 18 April 2012, 10:28 »

Hi has anyone tried the ebay egr blank plates on a mk 3 1.9tdi golf please? and when fitted do you need to remove any hoses etc??

coxy1980_123 · « **Reply #1 on:** 19 April 2012, 13:01 »

Bump help me

coxy1980_123 · « **Reply #2 on:** 19 April 2012, 19:47 »

ive read on another forum tha if you disconnect the hose goin to the egr and blank that off it has the same effect as deleting the egr is this the case?

archie837 · « **Reply #3 on:** 19 April 2012, 21:04 »

Imagine so. Might be better off looking in the mk4 section as it's a more common mod than on the mk3 diesel.

coxy1980_123 · « **Reply #4 on:** 19 April 2012, 21:22 »

ok ill take a look cheers.

gti gaz · « **Reply #5 on:** 20 April 2012, 08:09 »

Why bother it does not make that much diffrence

Rmachines · « **Reply #6 on:** 22 April 2012, 11:29 »

You can just disconnect the EGR, If it has a needle lift sensor it will throw a code, but shouldn't effect it, The only reason to blank the EGR is if its all gunked up and sticking open rather than closed.

coxy1980_123 · « **Reply #7 on:** 22 April 2012, 15:52 »

i think it might be stickin open somtimes mate . if i did blank it do i just put the plates in ??

Rmachines · « **Reply #8 on:** 22 April 2012, 17:05 »

Fit the plates and block the vac hose, I cant remember if there is a needle lift sensor though, I guess not, so just make sure the solenoid near the intake pipe is left plugged in but the hose is blocked off. Otherwise you might end up with limp mode