Car seems slower after i fitted Forge 007p

[cullygti]

mine was lacking boost when first fitted i undone then done back up and was fine just luck me thinks 

[turbopete]

Ill double check clips and if that doesnt work ill try a yellow spring, for the sake of £20. Cheers

[Big Tone]

Ill double check clips and if that doesnt work ill try a yellow spring, for the sake of £20. Cheers

Do you have an air compressor?

Pressure test it to be sure.

[turbopete]

Got a compressor yeah, How do i test it? Not much cop with this type of stuff.

[Big Tone]

Got a compressor yeah, How do i test it? Not much cop with this type of stuff.

Do a bit of searching on here pal, basically you block off the boost tract at various points and pressurise it, any leakage you will hear/see ( if you are a tart like me and go round each joint with gas detector )

Wouldnt reccommend it though if you not confident, even at "low" pressures, you could damage the car or yourself if you dont do things correctly.

[harlemex]

I was gonna get one of these, but now ive heard this, think ill stick with my baileys. 

[Big Tone]

I was gonna get one of these, but now ive heard this, think ill stick with my baileys. 

 

Can't see forge making a "new and improved" dv, with its own inbuilt fault 

Saying that though, any successful users?

[DMcK]

I've been thinking about getting one. Is a diverter valve the same as a dump valve? I was also told by 2 mechanics dump valves are no good for the engine and can cause problems. What you lot think?

[Big Tone]

I've been thinking about getting one. Is a diverter valve the same as a dump valve? I was also told by 2 mechanics dump valves are no good for the engine and can cause problems. What you lot think?

True.

read the sticky about dump and diverter valves. They different

[DMcK]

I've been thinking about getting one. Is a diverter valve the same as a dump valve? I was also told by 2 mechanics dump valves are no good for the engine and can cause problems. What you lot think?

True.

read the sticky about dump and diverter valves. They different

What you think about the Forge 008 then? No go or approved? I just read the sticky quite a good read.  They say a must on a mapped engine. Mines not mapped...YET!