Car seems slower after i fitted Forge 007p

[turbopete]

Fitted a forge 007p but my car doesnt seem to have as much poke as it did with standard black one. Any ideas? thanks in advance.

[cullygti]

is the vacuum pipe corroded 

[Ashmond]

or have u split a pipe whilst fitting?

[turbopete]

Put a new silicone pipe on the top of valve, couldnt see any split pipes.

[Toby]

u must have a boost leak, fitting a 007 wont make it anyy slower

[turbopete]

Checked for leaks next to Valve but nothing noticeable. Did notice a hole in exhaust though, Could that make a difference?

[Big Tone]

Checked for leaks next to Valve but nothing noticeable. Did notice a hole in exhaust though, Could that make a difference?

How did you "check for leaks?", done all jubilees up tight?

[s-l-i-x]

Is it mapped? What spring is in there if one at all? 

[turbopete]

Just looked for splits in the hoses i was working next too. Ill double check the clips tonight. Yes its mapped, got a green spring in. Seems to be lacking in torque more than anything.

[s-l-i-x]

Try a yellow spring. Mine held boost better when I went from green to yellow.

Just a bit weird you say it happened after you fitted the 007p. So fingers pointing to that area.