« previous next »
Pages: [1] 2

Author Topic: Fitting pd 130/150 middle pipe to 1.8t aum. Updated with problem.  (Read 1932 times)

Offline Big Tone

  • I live here
  • *****
  • Posts: 1,254
Fitting pd 130/150 middle pipe to 1.8t aum. Updated with problem.
« on: 17 November 2011, 11:08 »
In the parts catalog it shows two sleeves to use when fitting. Presume these are required? And are not part of the standard set up?
« Last Edit: 25 December 2011, 12:31 by Big Tone »
Logged

****FOR SALE**** 11 Months MOT, 5 Months Tax - 1.8T AUM, Stage 1 map, Lowered 35mm on Jamex Springs, Smoothed Airbox, Pipercross Panel, Forge 007P, N249 Bypass, Silicon Breather Hoses,Silicon Vac Hoses, Top Mounts & Bushes All Round, Catch Can Install,  New Discs and Pads All Round, A Big Sub, A SH*TLOAD of Polishing and A Thirst For V-POWER! Profile/msg for info!

Offline sprout99

  • Here all the time
  • ****
  • Posts: 470
Re: Fitting pd 130/150 middle pipe to 1.8t aum.
« Reply #1 on: 17 November 2011, 11:40 »
yeah

one to joint to cat and one to back box before it goes over axle
Logged
25th Anniversary TDi - PD
Oak green mk2
V50 D5 Sportwagon

Offline houston

  • I live here
  • *****
  • Posts: 1,755
Re: Fitting pd 130/150 middle pipe to 1.8t aum.
« Reply #2 on: 17 November 2011, 16:47 »
the sleeves are part of oe system so if you havent touched your exhaust then you should already have them, you can reuse the cat to middle pipe sleeve, but if its not a genuine exhaust pipe youve bought then you will need a u clamp to hold the other end.

buy new coach bolts and the old sleeves will be fine to use again. but note they are slightly different sized sleeves so dont mix em up
Logged

Offline Big Tone

  • I live here
  • *****
  • Posts: 1,254
Re: Fitting pd 130/150 middle pipe to 1.8t aum.
« Reply #3 on: 17 November 2011, 19:18 »
Quote from: houston on 17 November 2011, 16:47
the sleeves are part of oe system so if you havent touched your exhaust then you should already have them, you can reuse the cat to middle pipe sleeve, but if its not a genuine exhaust pipe youve bought then you will need a u clamp to hold the other end.

buy new coach bolts and the old sleeves will be fine to use again. but note they are slightly different sized sleeves so dont mix em up

Top man, saved me some money there.
Logged

****FOR SALE**** 11 Months MOT, 5 Months Tax - 1.8T AUM, Stage 1 map, Lowered 35mm on Jamex Springs, Smoothed Airbox, Pipercross Panel, Forge 007P, N249 Bypass, Silicon Breather Hoses,Silicon Vac Hoses, Top Mounts & Bushes All Round, Catch Can Install,  New Discs and Pads All Round, A Big Sub, A SH*TLOAD of Polishing and A Thirst For V-POWER! Profile/msg for info!

Offline Big Tone

  • I live here
  • *****
  • Posts: 1,254
Re: Fitting pd 130/150 middle pipe to 1.8t aum.
« Reply #4 on: 25 December 2011, 12:30 »
Quote from: houston on 17 November 2011, 16:47
the sleeves are part of oe system so if you havent touched your exhaust then you should already have them, you can reuse the cat to middle pipe sleeve, but if its not a genuine exhaust pipe youve bought then you will need a u clamp to hold the other end.

buy new coach bolts and the old sleeves will be fine to use again. but note they are slightly different sized sleeves so dont mix em up

Just gone to do this and there is no sleeve between the middle box and back box. WTF?

Exhaust Is factory fitted.

Time for some chopping I presume.
Logged

****FOR SALE**** 11 Months MOT, 5 Months Tax - 1.8T AUM, Stage 1 map, Lowered 35mm on Jamex Springs, Smoothed Airbox, Pipercross Panel, Forge 007P, N249 Bypass, Silicon Breather Hoses,Silicon Vac Hoses, Top Mounts & Bushes All Round, Catch Can Install,  New Discs and Pads All Round, A Big Sub, A SH*TLOAD of Polishing and A Thirst For V-POWER! Profile/msg for info!

Offline Mike671

  • Not said much yet
  • **
  • Posts: 87
Re: Fitting pd 130/150 middle pipe to 1.8t aum. Updated with problem.
« Reply #5 on: 25 December 2011, 12:47 »
You got it  :smiley:
Logged
Esplanade V.W Audi Mercedes And Smart Tech

Offline thatwillis

  • I live here
  • *****
  • Posts: 669
Re: Fitting pd 130/150 middle pipe to 1.8t aum. Updated with problem.
« Reply #6 on: 25 December 2011, 14:43 »
Yeah i noticed this too I haven't got round to fitting mine yet. Get yours from uni part? Some pics would be good if you get the chance  :smiley:
Logged

Offline Big Tone

  • I live here
  • *****
  • Posts: 1,254
Re: Fitting pd 130/150 middle pipe to 1.8t aum. Updated with problem.
« Reply #7 on: 25 December 2011, 14:48 »
Quote from: thatwillis on 25 December 2011, 14:43
Yeah i noticed this too I haven't got round to fitting mine yet. Get yours from uni part? Some pics would be good if you get the chance  :smiley:

Yup bud, unipart.
Will take some pics, thinking about waiting for my downpipe and decat then ill just do it all in one go.
Logged

****FOR SALE**** 11 Months MOT, 5 Months Tax - 1.8T AUM, Stage 1 map, Lowered 35mm on Jamex Springs, Smoothed Airbox, Pipercross Panel, Forge 007P, N249 Bypass, Silicon Breather Hoses,Silicon Vac Hoses, Top Mounts & Bushes All Round, Catch Can Install,  New Discs and Pads All Round, A Big Sub, A SH*TLOAD of Polishing and A Thirst For V-POWER! Profile/msg for info!

Offline scarr89

  • I live here
  • *****
  • Posts: 3,223
  • Mk4 Golf, DERV FTW!
Re: Fitting pd 130/150 middle pipe to 1.8t aum. Updated with problem.
« Reply #8 on: 26 December 2011, 18:09 »
May I ask why you would want to do this? What is the differences and potential benefits if any?  :smiley:
Logged

Offline houston

  • I live here
  • *****
  • Posts: 1,755
Re: Fitting pd 130/150 middle pipe to 1.8t aum. Updated with problem.
« Reply #9 on: 27 December 2011, 11:52 »
no sleeve? maybe its an agu thing. what was on to join the pipes?
Logged
Pages: [1] 2
« previous next »