Author Topic: not holding boost 1st or 2nd????  (Read 3282 times)

Offline jamie1989

  • I live here
  • *****
  • Posts: 1,174
not holding boost 1st or 2nd????
« on: 08 October 2011, 21:41 »
I have had a stage 1 R-Tech remap before fitting my FMIC.
I have got a boost gauge fitted and I am 80% positive it used to hold 14psi through all gears before fitting the FMIC.
But now Ive fitted the intercooler I have noticed only 1st and 2nd will spike to 14PSI then drop slowly to 10ish but 3rd, 4th and 5th its holding 14.
Is this right or am I going loopy? It doesnt seem any faster or slower its just something bugging me atm.
1.6-1.8t AGU K03s, Forge actuator, Forge 007p, turbo back exhuast, Ths front mount, Catch can, 5 piece silicone boost pipes and creation sports tip. Stage 2 atm 232bhp 270lbs. Waiting for custom mapping :-)

Offline RTechUK

  • Forum Supporter
  • I live here
  • *****
  • Posts: 3,379
  • R-TECH OFFICE 01455 617233
Re: not holding boost 1st or 2nd????
« Reply #1 on: 08 October 2011, 22:05 »
I have had a stage 1 R-Tech remap before fitting my FMIC.
I have got a boost gauge fitted and I am 80% positive it used to hold 14psi through all gears before fitting the FMIC.
But now Ive fitted the intercooler I have noticed only 1st and 2nd will spike to 14PSI then drop slowly to 10ish but 3rd, 4th and 5th its holding 14.
Is this right or am I going loopy? It doesnt seem any faster or slower its just something bugging me atm.

It sounds about right for 1st/2nd gear as there is very little loading on the engine, try it up a very steep hill in 2nd and you will find it will hold boost better.  For a spec1 remap it should be peaking a little higher closer to 18psi then tail off the 14psi on the higher gears? You could have a weak actuator?



R-Tech Customer Feedback / Reviews
http://r-techpower.co.uk/r-tech-feedback.php
VW AUDI SEAT SKODA 1.8T-1.9TDi -2.0TFSI  Tuners

 01455 617233
http://sticky-vnt.co.uk Midlands

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: not holding boost 1st or 2nd????
« Reply #2 on: 08 October 2011, 22:06 »
i would only use a fmic for stage 2 .I would hate to get lag. :undecided:
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline jamie1989

  • I live here
  • *****
  • Posts: 1,174
Re: not holding boost 1st or 2nd????
« Reply #3 on: 08 October 2011, 22:23 »
Thank god for that  :smiley: I will check the higher gears tomorrow and im sure I will find a nice hill to climb in sunny south wales haha.

Ohh yeah Nick I found out why my car was only boosting 4psi a week after your remap, The crank shaft sensor failed. I had it checked on vagcom bought a genuine one from VW and the little beast woke up again  :grin:

 James2 I havent noticed any lag mate if im honest.
1.6-1.8t AGU K03s, Forge actuator, Forge 007p, turbo back exhuast, Ths front mount, Catch can, 5 piece silicone boost pipes and creation sports tip. Stage 2 atm 232bhp 270lbs. Waiting for custom mapping :-)

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: not holding boost 1st or 2nd????
« Reply #4 on: 08 October 2011, 22:28 »
lol my cam shaft sensor failed after r-tech remap .I thought the timing was out,as a friend changed it 5 days before. :laugh:
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline jamie1989

  • I live here
  • *****
  • Posts: 1,174
Re: not holding boost 1st or 2nd????
« Reply #5 on: 08 October 2011, 22:37 »
How random is that lmao

I need more power in my life  :sad:
1.6-1.8t AGU K03s, Forge actuator, Forge 007p, turbo back exhuast, Ths front mount, Catch can, 5 piece silicone boost pipes and creation sports tip. Stage 2 atm 232bhp 270lbs. Waiting for custom mapping :-)

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: not holding boost 1st or 2nd????
« Reply #6 on: 08 October 2011, 22:47 »
you know that, i need a thumper turbo 1000 bhp+.  :drool: skyline from hell.  :drool:
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: not holding boost 1st or 2nd????
« Reply #7 on: 08 October 2011, 22:48 »
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline Ant1981

  • I live here
  • *****
  • Posts: 1,601
  • Feed me, prod me
80% of your posts are total tripe, as they are mostly replies to sh1te posts created by the morons that, unfortunately this forum attracts.

'02 VW Golf 1.8 GTi Turbo - 186,000 miles
'09 Kawasaki Ninja ZX-6R
1990 VW Golf GTi 16V - Gone but not forgotten
Currently considering next car