« previous next »
Pages: [1] 2

Author Topic: advise needed  (Read 2751 times)

Offline djmagpie

  • Not said much yet
  • **
  • Posts: 52
advise needed
« on: 06 October 2011, 01:02 »
i have a 1999 golf turbo agu finding it hard to get it 2 all gears will go in but really rough and knochey seems to b getting worst do i need a new gearbox ??? just had a g60 flywheel fitted and vr6 clutch
Logged
1.8t agu,,Bora Vents,,Cai,,Vr6 clutch/G60 flywheel,,forge dump valve,,jom coilovers,,eibach front and rear arbs,, 15mm front 20mm rear spacers ,,3" downpipe & decat..sportex 4"oval exhaust

Offline Tazzy

  • I live here
  • *****
  • Posts: 873
Re: advise needed
« Reply #1 on: 06 October 2011, 02:57 »
check fluid levels
Logged
If It Comes Off, Modify It!

Offline houston

  • I live here
  • *****
  • Posts: 1,755
Re: advise needed
« Reply #2 on: 06 October 2011, 08:03 »
Gear linkage alignment needed, prob just cos the box has been off
Logged

Offline benmanc

  • Here all the time
  • ****
  • Posts: 433
Re: advise needed
« Reply #3 on: 06 October 2011, 09:11 »
Its easy if its gear linkage...

http://www.youtube.com/watch?v=tp9ggefOjAE
Logged

Offline rio_gti

  • I live here
  • *****
  • Posts: 2,298
  • "i'm not spending any money on it" Got a Hybrid!
Re: advise needed
« Reply #4 on: 06 October 2011, 09:19 »
Quote from: benmanc on 06 October 2011, 09:11
Its easy if its gear linkage...

http://www.youtube.com/watch?v=tp9ggefOjAE

you beat me to finding it!!!  :laugh:
Logged


2000 GTI 1.8t ARZ, S2000 filter, DSG intake, Forge 007 dv, Catch can, R-tech custom remap, 3" Supersize Silicone TIP, Powerflex dog bone, 'The Beast' FMIC, Ultimate delete, LCR fuel pump, 3" Turbo back, K03 hybrid, Ported Manifold, S3 injectors, 80mm maf = 280bhp 270lbft :evil:

Offline benmanc

  • Here all the time
  • ****
  • Posts: 433
Re: advise needed
« Reply #5 on: 06 October 2011, 09:23 »
 :grin: yeahh haha.  Had it in my bookmarks bar as I done it other day.  Need to make sure you get something to tightly fit the alignment gap as I found out the hard way after using a nail it wouldn't go in 5th and made it worse until I did it with a thicker nail
Logged

Offline djmagpie

  • Not said much yet
  • **
  • Posts: 52
Re: advise needed
« Reply #6 on: 06 October 2011, 11:47 »
it was like it before i had the clutch done .thanks for the link ill try it later see how it gose :smiley:
Logged
1.8t agu,,Bora Vents,,Cai,,Vr6 clutch/G60 flywheel,,forge dump valve,,jom coilovers,,eibach front and rear arbs,, 15mm front 20mm rear spacers ,,3" downpipe & decat..sportex 4"oval exhaust

Offline djmagpie

  • Not said much yet
  • **
  • Posts: 52
Re: advise needed
« Reply #7 on: 06 October 2011, 15:08 »
just tryed the link adjustments as showed in the vid and mine dont look anything like on the vid ??
Logged
1.8t agu,,Bora Vents,,Cai,,Vr6 clutch/G60 flywheel,,forge dump valve,,jom coilovers,,eibach front and rear arbs,, 15mm front 20mm rear spacers ,,3" downpipe & decat..sportex 4"oval exhaust

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: advise needed
« Reply #8 on: 06 October 2011, 15:19 »
Check the oil quality and level 1st, might be worth changing the oil.
Logged

Offline djmagpie

  • Not said much yet
  • **
  • Posts: 52
Re: advise needed
« Reply #9 on: 06 October 2011, 15:22 »
Gearbox oil was done wen clutch was fitted 2 weeks ago
Logged
1.8t agu,,Bora Vents,,Cai,,Vr6 clutch/G60 flywheel,,forge dump valve,,jom coilovers,,eibach front and rear arbs,, 15mm front 20mm rear spacers ,,3" downpipe & decat..sportex 4"oval exhaust
Pages: [1] 2
« previous next »