hub bolt stuck on mk3 golf

[thai-wronghorse]

Doubt it's that, they are fecking tight. I literally lifted the car off the axle stand undoing it.

Needs to be a 90 degree, not at all bent, bar and it will slowly loosen.

If it's THAT bad just angle grind the showing threads.

[gino-93]

haha cheers guys, looks like the angle grinder it is
least i get to have some fun 

[Jack3559]

Had two of us under a breaker bar to get my rear strut bolts out, one person stood on the drum.

Some bolts are harder than others... Especially once they've rusted stuck.

[danny_p]

if there really f**ked i drill the nut then get the big air inpacter on them.

chunt is on mk3's sometimes the glue the shafts in as well.  and it's sledgehammer and sparks to get em out

[Diamond Hell]

Scrap it.

[thai-wronghorse]

Burn it.

[Bellend]

Doubt it's that, they are fecking tight. I literally lifted the car off the axle stand undoing it.

Needs to be a 90 degree, not at all bent, bar and it will slowly loosen.

If it's THAT bad just angle grind the showing threads.

You tried to undo the nut when the car was on stands?
You're a braver man than me 

Bit difficult not to when you only have three wheels on the car.

It was fine, people just need to grow a pair, that's all. What's the worse that can happen? A car about to be scrapped falling on it's brake disc/chassis.

OMFG.

[rich1977]

although its miles easier when the wheels on with car on the ground imho

[Bellend]

although its miles easier when the wheels on with car on the ground imho

Feel free to go back in time and bring me a 14" or bigger 57.1mm 4x100 wheel then. 

[danny_p]

was feeling kind so when takeing my new time machene for a spin  i went back in time to fetch your wheel,  i even managed to find it  but then i thought, f**k it and weighed the wheel in and bought lottery tickets with the proceeds.

soz but that idea just seemed so much better