Author Topic: Cabelt slipping off? - PIC ADDED  (Read 3828 times)

Offline alexd

  • GTI forum regular
  • ***
  • Posts: 169
Cabelt slipping off? - PIC ADDED
« on: 24 January 2011, 10:33 »
Hi all, so after paying £450 to have the cambelt done on my AUQ I didnt drive it much for a couple of days, only going 2 miles to work and back. Now i hate this as i know it never really warms up properly so i make sure to take it out in the evening to do just that, so yesterday i took her out for a little test drive only to notice the smell of burning rubber when i came to a standstill, so i let it wind down then turned her off, popped the cambelt cover only to see the belt looked like it was 40k old and had worked itself about 3-4mm off the pulley!!!! :@

Now i've driven it to work today so i can take it over to him at lunch, my question is, should i have run the cambelt in more before giving it some beans?? Which i didn't really do but i certainly put my foot down. Also looks like cheap belt/parts for 450 notes the c*nt
« Last Edit: 24 January 2011, 14:51 by alexd »

Offline pjk33

  • Not said much yet
  • **
  • Posts: 16
Re: Cabelt slipping off?
« Reply #1 on: 24 January 2011, 10:43 »
u should of gone vw if u where payin that i had quote from them last week about £360 (crewe)cambelt/tensioner i dont think u have to run them in.if he says ur fault smash him. good luck :evil:

Offline tech1889

  • Serious forum addict
  • *
  • Posts: 8,039
  • Mk2 GTI FTW !!
Re: Cabelt slipping off?
« Reply #2 on: 24 January 2011, 10:46 »
thats bad get the guy to replace it asap..
Mk4 Golf GTI anniversary and mk6 golf tdi :)

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Cabelt slipping off?
« Reply #3 on: 24 January 2011, 10:52 »
Sounds like it was not tensioned enough

Offline tech1889

  • Serious forum addict
  • *
  • Posts: 8,039
  • Mk2 GTI FTW !!
Re: Cabelt slipping off?
« Reply #4 on: 24 January 2011, 11:03 »
was tensioner replaced or was old one re-used ?? i would go for tensioner fail !
Mk4 Golf GTI anniversary and mk6 golf tdi :)

Offline brianpologti

  • Here all the time
  • ****
  • Posts: 444
Re: Cabelt slipping off?
« Reply #5 on: 24 January 2011, 13:34 »
Sounds like the little idler wheel washer was put on the wrong side of the pulley, ( or left the old one on) thus throwing the belt out a bit ,

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,170
  • Golf GTI 1.8T AGU
Re: Cabelt slipping off?
« Reply #6 on: 24 January 2011, 14:31 »
They have a hydraulic tensioner so if the old one was reused it could have failed...


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline alexd

  • GTI forum regular
  • ***
  • Posts: 169
Re: Cabelt slipping off? - PIC ADDED
« Reply #7 on: 24 January 2011, 14:50 »
Well the receipt says belt, tensioner, water pump; it's a shame the blokes a really nice chap and has known my dad for years, since college, im just wondering if he's bein a 2 bob and purposely tried to 1 nil me, or he has made a genuine mistake, anyways - PIC:


Offline alexd

  • GTI forum regular
  • ***
  • Posts: 169
Re: Cabelt slipping off?
« Reply #8 on: 24 January 2011, 14:51 »
You can even see the ribs in the belt coming through, it's just not right is it.

Offline GunnerCP

  • I live here
  • *****
  • Posts: 829
Re: Cabelt slipping off? - PIC ADDED
« Reply #9 on: 24 January 2011, 14:58 »
I had a look at mine yesterday actually (randomly..) anyway, mine sits the same as yours pretty much, i.e towards the outer of the pulley (might even be flush or there abouts - I'll have a look later when I head out)