Bluetooth in MY11 GTI Works with IPhone !

[Beardo]

Cool thanks both, Mike. if you want to flog one let me know how much....

[mike.]

Ok, I have ended up with two of these (7P6 035 730C)

If someone would like it, please PM me for the details, £340 delivered 


******************  SOLD  *******************

[isse]

Anyone installed this new version on a car that did not have bluetooth from the start?
Would like to hear the result...
/I

[mortygt140]

Anyone installed this new version on a car that did not have bluetooth from the start?
Would like to hear the result...
/I

Ive done about 10+ retro fit BT kits mate its not hard just take your time and then code it up afterwards and you should be answering calls with the best of em

I need to know if this will work on the red display of the mk5?? There is a seller on ebay that says it only works with the white display but I was under the impression that vw brought it out to work with both white and red?

Cheers

Darren

[SteveP]

Finally got mine today 



Plug and play with the original Mk6 rSap premium bluetooth loom for the phone side of things, with the iPhone and rSap blackberry both working: -



And bluetooth audio



But this need work on the loom as with the factory rSap loom it's only playing out of the left hand speakers.

Will get this sorted when I fit my new RNS-510 later today 

[mike.]

Got mine installed today   

Got these fault codes coming up and they wont clear down.

Thursday,22,July,2010,19:09:38:22341
VCDS Version: Release 10.6.0

                Address 77: Telephone       Labels: None
Control Module Part Number: 7P6 035 730 C    HW: 7P6 035 730 C
  Component and/or Version: TELEFON       H05 0440
           Software Coding: 0A00000000010100
            Work Shop Code: WSC 00000 000 00000
              ASAM Dataset: UHVNA A01007 (VW36)
                      VCID: 3260A173D447
3 Faults Found:

9455633 - Telephone Microphone
          B1048 11 [009] - Short to Ground
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 60
                    Mileage: 7439 km
                    Date: 2004.14.25
                    Time: 19:09:52

9457427 - Negative output audio channel for speech/telephone
          B104F 13 [009] - Open Circuit
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 60
                    Mileage: 7439 km
                    Date: 2004.14.25
                    Time: 19:09:52

9458195 - Control Module for Cellular Telephone 
          B1052 13 [009] - Open Circuit
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 60
                    Mileage: 7439 km
                    Date: 2004.14.25
                    Time: 19:09:52

Everything is working, voice dial, calls, and voice recognition on the RNS510 so not that worried, just not sure why they are there..

[SteveP]

^^^ Are you using the original wiring harness in the car or a supplied plug and play one from the seller of the kit?

Now I have connected the missing wires in the original harness mine is 100% working (inc stereo A2DP) with no error codes 

[mike.]

I'm using the harness I bought from Darren, I think it just the standard one..

My Bluetooth Audio is only coming out of the right speakers
When I connect the Bluetooth Audio it clears one of the fault codes. 

[SteveP]

Your loom is incorrectly wired.

On the RNS end how many wires are connected on the green connector?

[mike.]

It looks like this Steve, took this picture before I screwed the car back together.

I'll ring it out tomorrow when I have less red wine in me 

Got the pinouts from my-gti.com..