R-Tech Customers cars and power graph gallery

[Yohan]

Yea Don't think that should be running stoich at full boost.    I'd expect it to start dropping before you get to 3k.

Well the ancient (170,000 miles) V6 4motion 3BAR fuel pump has today been replaced with a relatively new (56,000 miles) Audi TT 4BAR pump.

Once I've got everything on the car stablised, I might have to pop in to R-Tech for a day to get the map checked/tweaked as required 

[RTechUK]

Yea Don't think that should be running stoich at full boost.    I'd expect it to start dropping before you get to 3k.

In the real world it will be running 0.89 across the midrnage, the issue above is the ramp rate of the test it only laster for a few seconds in 4th gear.  log on the road or a braked dyno and it will be correct.  This was checked out thet day after the power run.

Nicjk

[Yohan]

Yea Don't think that should be running stoich at full boost.    I'd expect it to start dropping before you get to 3k.

In the real world it will be running 0.89 across the midrnage, the issue above is the ramp rate of the test it only laster for a few seconds in 4th gear.  log on the road or a braked dyno and it will be correct.  This was checked out thet day after the power run.

Nicjk

Correct

It's much much happier with it's new fuel pump fitted!

[Chris.]

Nick, got any graphs with a T304e fitted?

[RTechUK]

Nick, got any graphs with a T304e fitted?

AGU Stock rods at 17PSI.



Same car & turbo with rods and pistions and 440c injectors maxed out at around 27psi managed a 12.3s 1/4 at Santa pod.
Now running maxed out on currnet wastegate spring with 630cc injectors at 425bhp then a shot of NOS  to take it upto just under 500bhp with the aim to crack 11s

[Chris.]

That looks naughty.

I want something that will be moderately quick without having to be at the end of the rev range before the turbo being on full song.  is that a .50 A/R ratio?

[Chris.]

What manifold was that running?  I might run the stainless ones off ebay and maybe modify it to make it top mounted. hmmm

[RTechUK]

What manifold was that running?  I might run the stainless ones off ebay and maybe modify it to make it top mounted. hmmm

Custom DIY built from my idea....lol




A few pages back there are 3 videos of it on the dyno

[Chris.]

Oh i cant make anything like that.  no where near those skills!  GIve me bolt together parts lol

[Wazzzer]

that car is awesome, looks nothing from the outside either, proper sleeper