« previous next »
Pages: [1] 2

Author Topic: Catch can problem!  (Read 1665 times)

Offline DarkGti

  • I live here
  • *****
  • Posts: 1,706
Catch can problem!
« on: 01 April 2010, 17:49 »
Right! After installing my Saikou Michi catch can and removing all the pcv system i have a problem, when my car comes to idle after revving the rev's drop like its going to stall but dosent and the revs rise again and its fine has anyone got any ideas what this could be?

p.s all the hoses are tight and jubilee clipped!
Logged

Offline Purely VAG

  • I live here
  • *****
  • Posts: 2,441
Re: Catch can problem!
« Reply #1 on: 01 April 2010, 20:11 »
Is the crankcase ventilation pipe sealed in properly, has a u-clip over it, that can be quite a little sh!t to get back in properly
Logged

✉ Jrd@PurelyVAG.co.uk // www.PurelyVAG.co.uk

Offline DarkGti

  • I live here
  • *****
  • Posts: 1,706
Re: Catch can problem!
« Reply #2 on: 01 April 2010, 20:33 »
yea that pipe fitted and U clip fitted properly
Logged

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: Catch can problem!
« Reply #3 on: 01 April 2010, 22:47 »
i would double check everything and anything you moved to get it to fit in  :huh:
Logged
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,170
  • Golf GTI 1.8T AGU
Re: Catch can problem!
« Reply #4 on: 01 April 2010, 22:53 »
Have you reset the throttle body? Mine took a while to get used to not having the PCV system, just give it some time. Oh and I know this sounds patronising but is the tap on the bottom shut? I needs to be wound out as far as it will go to be shut
Logged


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline DarkGti

  • I live here
  • *****
  • Posts: 1,706
Re: Catch can problem!
« Reply #5 on: 02 April 2010, 10:32 »
Sorted know i forgot to tighten the jubilee clip on the hockey puck thing and it came out! derrrrrr :embarassed:
Logged

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,170
  • Golf GTI 1.8T AGU
Re: Catch can problem!
« Reply #6 on: 02 April 2010, 11:45 »
you fool lol

I've ditched my hockey puck  :wink:
Logged


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline northeast_gti-t

  • Serious forum addict
  • *
  • Posts: 6,554
  • "1.8T AGU"
Re: Catch can problem!
« Reply #7 on: 02 April 2010, 13:30 »
Quote from: DarkGti on 02 April 2010, 10:32
Sorted know i forgot to tighten the jubilee clip on the hockey puck thing and it came out! derrrrrr :embarassed:
ooops  :grin: ah well at least you found the problem out easy enough tho  :wink: i did the same as wes and removed my hockey puck just a 90 degree elbow in mine  :wink:
Logged
2000 Mkiv GTi 1.8T AGU

Offline DarkGti

  • I live here
  • *****
  • Posts: 1,706
Re: Catch can problem!
« Reply #8 on: 02 April 2010, 13:53 »
yea going get a 90 degree elbow today and get rid of it as well!
Logged

Offline DarkGti

  • I live here
  • *****
  • Posts: 1,706
Re: Catch can problem!
« Reply #9 on: 02 April 2010, 14:00 »
yea going get a 90 degree elbow today and get rid of it as well!
Logged
Pages: [1] 2
« previous next »