sub enclosures.....

[kniterider]

right, as i need this to be removable i aint goin making any boxed in areas in the boot, so if any of you lot have a basic design for a sub box (10") could you post dimensions on here???
i have sh@t loads of mdf of different thicknesses at work so will make it there just need a 'plan' to work to!!!!

Gaz

[Len]

If ya already got the speaker it will tell ya minimum volume - prob in cubic feet.
So to give yourself a bit of a front panel you will need a 12" x 12" to sit the speaker in. Then ya can make the depth of the box to suit the volume.

[kniterider]

ill have to check me sub (was in shelf) its somewhere safe so ill have to dig it out then and see what it says!!

Gaz

[Len]

Hope u've still got the box or the literature then.

If not try the manufactureres website, might give ya the info needed.

1 to 1.5 cu ft is usually enuff.

[kniterider]

right knocked up a box at work last night, dimentions are:

18"x14"x14" ive put a port hole in it as well as my sub hole (port hole can be blocked off again if not needed, so ill try it at the weekend!, i havent got a clue what the cubic whatever of that will be??? when its carpeted it should look sweet

Gaz

[Len]

Thats just over 2 cu ft. If those are external dimensions then it will be a bit smaller but will still be near to 2 cu ft.

So that should be a good size.

[kniterider]

yeah there external measurements, and the mdf is 3/4" thick, so hopefully will sound ok when done, gonna have to see how it sounds with the port open and closed before i carpet it......

Gaz