Hunting and stalling....!

[raks.2008]

Ever since the timing, leads and coil has been replaced the car sometimes stalls when the revs drop between changing gears. The other problem is that the car seems sometimes hunts when hot sitting in traffic or standstill.....

Can any1 please help.... I have checked for vacume leaks and the only outcome was the air intake pipe going onto the throttle body has is slightly split where the jubilee clip sits...

Anyw suggestions...

Thanks

[ToddyGTi]

I'd check the ISV. Some ppl will alter the timing slightly to compensate for this being broken.

[raks.2008]

I have checked the ISV, by removing the pipe going to the main intake and the car cuts out, which means the ISV is running if i am not wrong...

It only happens when the car is warm.... funny one that...

[rubjonny]

if its an 8v check the idle switch on bottom of tbody clicks with throttle shut and wires behind tbody it havent snapped

[TheRaven]

I have checked the ISV, by removing the pipe going to the main intake and the car cuts out, which means the ISV is running if i am not wrong...

It only happens when the car is warm.... funny one that...

This is what my car is doing, when its cold in the morning its fine, but when it gets warm it chugs a bit and cuts out when the revs drop!!!

Its doing my head in!

[mattkh]

This is what my car is doing, when its cold in the morning its fine, but when it gets warm it chugs a bit and cuts out when the revs drop!!!Its doing my head in!

Hi
What engine have you got.

[Khare]

give the ISV a nice clean with petrol. let it soak overnight in petrl then in the morning give it a clean with a small brush or something.

[cняis]

check the flying saucers rubber grommet (on the head)... i may have split and you may not have noticed it 

[raks.2008]

Hey....

Sorry about the late reply... been working out of London....!

The ISV is new and checked if it is working, by remoding the rubber pipe leading from it to the air intake pipe and it cuts out and the ISV starts buzzing, which is an indication sign that it works....

Chris you mentioned the flying saucer grommet. Where is that? sorry for being a dumb nut...lol

Thanks mate...

[Conker]

Is it a 16v ??