« previous next »
Pages: [1]

Author Topic: How do i fix this?  (Read 1400 times)

Offline Mikester

  • Forum addict
  • *
  • Posts: 6,427
  • Civic Type R
How do i fix this?
« on: 11 March 2008, 13:56 »
Its the bottom trim on the passenger side rear wheel, not sure if it has slide along or what? But the bit of metal hanging out the end confuses me? Do i need to pull it off? Or do i need a whole new bit?




Cheers
Logged

Offline RiCHiE360

  • I live here
  • *****
  • Posts: 886
Re: How do i fix this?
« Reply #1 on: 11 March 2008, 14:23 »
Looks liek the little plastic trim on the end has come off and the trim itself slid along an inchor so, not sure if you can buy the ends alone.
Id just slide it back along and grab one one of the end bits from a srcappers mate
Logged

Roofless VR6 FTW

Offline Mikester

  • Forum addict
  • *
  • Posts: 6,427
  • Civic Type R
Re: How do i fix this?
« Reply #2 on: 11 March 2008, 14:28 »
Quote from: RiCHiE360 on 11 March 2008, 14:23
Looks liek the little plastic trim on the end has come off and the trim itself slid along an inchor so, not sure if you can buy the ends alone.
Id just slide it back along and grab one one of the end bits from a srcappers mate

Does it just slide, i havnt touched it incase i break it, lol, So i can just slide it along? maybe give it a tap with a hammer?
Logged

Offline RiCHiE360

  • I live here
  • *****
  • Posts: 886
Re: How do i fix this?
« Reply #3 on: 11 March 2008, 14:29 »
Yeah those trims just slot in mate, theres bits that stick out running along the back of them trims and the just slot into some groves on the sill, u can pull them on and off all day long if it tickles ya fancy  :grin:
Logged

Roofless VR6 FTW

Offline Mikester

  • Forum addict
  • *
  • Posts: 6,427
  • Civic Type R
Re: How do i fix this?
« Reply #4 on: 11 March 2008, 14:30 »
Quote from: RiCHiE360 on 11 March 2008, 14:29
Yeah those trims just slot in mate, theres bits that stick out running along the back of them trims and the just slot into some groves on the sill, u can pull them on and off all day long if it tickles ya fancy  :grin:

Lol, well a lot ticklesmy fancy ;) but i think i will just do it the once mate, cheers for the reply, i have a new thread in teh midst of my mind lol!
Logged

Offline boneybradley

  • Forum Supporter
  • Serious forum addict
  • *****
  • Posts: 9,482
  • Back in a Mk3...
Re: How do i fix this?
« Reply #5 on: 11 March 2008, 14:50 »
mike you can buy the end piece seperate...best be going to vw!! and you should be able to slide the metal piece back..be gentle tho
Logged
Moderator of The Dub-Tug Squad!! (What some call the MK3 section!)



Full range of quality parts for your Volkswagen available at Oemandmore.co.uk

Offline Mr Blue

  • Forum addict
  • *
  • Posts: 6,133
Re: How do i fix this?
« Reply #6 on: 11 March 2008, 15:43 »
they look like they are sticking out too far.

take them off and adjust. few screws and should unclip.
Logged
:)

Offline Pete Taylor

  • I live here
  • *****
  • Posts: 1,229
Re: How do i fix this?
« Reply #7 on: 11 March 2008, 15:50 »
Get the end cap from vw along with the rivet that holds it on. Had to buy one for the front of mine and it was a nightmare trying to find it on ETKA after getting the wrong part initially so i'd look for part no's on Vag Cat first to save some time
Logged

kells

  • Guest
Re: How do i fix this?
« Reply #8 on: 11 March 2008, 22:03 »
just go to dealer, they have the end caps their for a few quid, i got new ones, no biggie :cool:
Logged

Offline Mikester

  • Forum addict
  • *
  • Posts: 6,427
  • Civic Type R
Re: How do i fix this?
« Reply #9 on: 11 March 2008, 23:08 »
cheers lads  :cool:

Off to VW i will be going  :cool:
Logged
Pages: [1]
« previous next »