does anybody know???

[Seth]

does anybody know if the antiroll bars off a gti will fit straight onto a driver

[DarnPB]

They should do. They are the same car but the driver has a less powerfull engine. Suspension, trim and everything else to my knowledge is the same.

[Gambit]

yeah they will fit no probs

[Seth]

what about the brakes and suspention Its a 1.6 not a 1.8

[DarnPB]

Still the same. The driver was a poor mans GTI. GTI without the GTI performance. I think everything is interchangeable bar engine components and ancilliaries.
Brakes, trim, interior, running gear etc.

[Seth]

brakes and handling are crap

[DarnPB]

As long as you use 15'' wheels, you can use the braking equipment from a G60. You will need the front hubs and the master cylinder too. As for handling, your shocks may be a little tyred. You can always upgrade when you replace but if upgrading, buy matching sets of springs and shocks. You WILL notice the difference.

[Seth]

could I use the front disks and calipers from a 16 valve?

[kkh120]

To use the calipers and discs from a 16v I think you need to change the hubs. I dont know if the driver will take the 8v barkes and discs without the hub change?

[Seth]

I was thinking just to the complete front end running gear off a valver and change the lot hubs,disks,calipers,suspension and anti roll bar