fitting front solid mount
it took me less than 20 min to all you need to do is
place a jack under the gearbox with a bit of wood between the box and jack raise the jack up untill it just makes contact with the box lossen the top nut untill off then go under the car remove the bolts 13mm and 16mm jack the box up so the mount can move slide the mount out i took it out the side of the oil filter found there to be more room this side
fit new mount in may require longer bolts for the 16mm under the car lower the box a small bit put all bolts then lower all the way tighten up bolts i used some lock thread on them and job done
