@Jordinary, welcome to the forum.
As @Watts has said, your poor fuel consumption could be gasoline (petrol) particulate filter (GPF) related. Assuming this is the case, then you might find the discussion topic at the link below helpful;
https://www.golfgtiforum.co.uk/index.php?topic=290349.msg2665390#msg2665390My post (reply #6) in that discussion topic includes a list of tell-tale signs that may be present when the GPF is going through a forced regeneration to neutralise accumulated particulate matter in the GPF (note; not all of these tell-tale signs may be present during a regeneration).
With cars that are used predominantly on longer journeys, the exhaust system will be hot enough to passively neutralise particulate matter in the GPF and you’re unlikely to be aware when a regeneration is happening. By contrast, with cars used mainly on short journeys such as yours, the engine and exhaust may not reach the optimum operating temperature for accumulated particulate matter to be neutralised passively - if so then GPF regenerations will be forced (a.k.a active) when additional fuel will be used to raise the temperature of the exhaust to neutralise the particulate matter, and this extra fuel usage will adversely affect fuel consumption for the duration of the regeneration process. Assuming your car is attempting a forced GPF regeneration, that probably explains your higher than expected fuel consumption. It might also explain the instance(s) of stop start being inactive as the car’s engine needs to keep running for the duration of a forced GPF regeneration, although there are a number of criteria that affect the operation - or non-operation - of stop start not related to GPF regenerations (from memory, these are listed in the owner’s manual).
Be aware that if a forced GPF regeneration is still in progress at the end of a journey when the car’s engine is switched off, it’ll recommence during the next (and subsequent) ignition cycle(s) until it has been successfully completed.
In the post at the link I’ve posted above, I’ve also provided details in my reply #6 of the process to help keep your car’s GPF clear that you might like to try.