Here is the coding and process.- Start ignition and turn off Lane Assist using button- Pop the bonnet handle to release the bonnet (you do not need to raise the bonnet fully). This is important otherwise the coding will not ‘write’ and you get a failed write message. - Plug in OBDeleven dongle into one port (located underneath drivers right side trim) - Turn ignition on (engine does not need to be running)- Launch OBDeleven on phone - Code as follows:- go to A5 Driver Assistance control unit-turn off sfd protection- then Long coding tab- scroll down to Configuration for lane departure warning Kl15- Change from default ‘Activated’ to ‘Last Setting’ -Slide to write coding - Coding accepted and default is now set to ‘Last setting’ - A few ignition starts to test and Lane Assist should now deactivated by default at ignition startup. If he follows those steps it should work.
All the info needed is on the OBDeleven forum.
Quote from: Dave1rs on 02 December 2021, 22:01All the info needed is on the OBDeleven forum.Where's the OBDEleven forum? I am expecting a dongle in the post in the next day or two!
Quote from: JoeGTI on 03 December 2021, 09:01Quote from: Dave1rs on 02 December 2021, 22:01All the info needed is on the OBDeleven forum.Where's the OBDEleven forum? I am expecting a dongle in the post in the next day or two!https://forum.obdeleven.com/board/377/mk8