coilover help needed please

[viperjsy]

hi what do I need to put on here please thank you

I know I need Suspension Strut Top Mounts+ Bearings x2 but is there any thing else I need
 

[MoMartin]

This isn't essential, but putting copper grease on the coil would be a good idea

[sharki786]

You need some NEW top mounts just incase your old ones fail. As lowering a car will put ALOT of strain on other suspention componants.

[viperjsy]

thank you for your help

wouldent the copper grease destroy the dust cover

[Wazzzer]

new bearing and top mount, fit to the car then cap in engine bay followed by top nut, then the black cover

[viperjsy]

thank you Wazzzer

[1.8Tgolf_Chris]

+ just remember to use the old slim inner top nut from your stock struts

[viperjsy]

do I use the aluminum spacer or leave it off

[viperjsy]

hi do the Bearings just slide on or screw on thank you

[1.8Tgolf_Chris]

use the front coilovers how they came in the box, with nothing on the top thread the bearing just rests on and so does the upper rubber mount, then you screw the inner strut nut down- Fit the coilover to the car then the top hat goes on in the engine bay, and the final top lock nut