« previous next »
Pages: [1] 2

Author Topic: uprated camshafts in 20vt  (Read 3145 times)

Offline shaft69

  • I live here
  • *****
  • Posts: 1,790
uprated camshafts in 20vt
« on: 20 August 2014, 23:14 »
Anyone running uprated camshafts in 20vt?? Thinking of investing set of Kent or autotech inlet camshaft just want to know experiences of cams in 1.8t.
Logged
MK4 1.8t bored/stroked 2.0lt AEG crank, 83mm supertech pistons, intergrated rods, ACL race brgs, Flowed large port head, Supertech valves, All ARP bolts, GTX2871r turbo, Tial wastegate, 3" pipewerx dp, REVO stage 3 tune, Direct port water meth, MORE TO COME!!! Ready to go racing
Owner of bndynamix ltd. BMW and mini specialist
184 Wallgate, Wigan
WN3 4AL
07966492823.

Offline Chris.

  • I live here
  • *****
  • Posts: 1,916
Re: uprated camshafts in 20vt
« Reply #1 on: 20 August 2014, 23:44 »
Not much point in all fairness pal.  OEM cams are fairly damn good.
Logged

Click For Build Thread

248bhp  278lbft R - Tech Powered 1.8T!!  - Gone but NOT forgotton

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: uprated camshafts in 20vt
« Reply #2 on: 21 August 2014, 08:22 »
I ran a 296 Kent cam in a mini and by god it was like a turbo kicking in at 3,000 rpm
I wouldn't want that to kick in and then the turbo off an uprated golf especially if one overlapped the other
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline shaft69

  • I live here
  • *****
  • Posts: 1,790
Re: uprated camshafts in 20vt
« Reply #3 on: 27 August 2014, 18:28 »
Have intergrated engineering inlet cam on order now see how that pans out.
Logged
MK4 1.8t bored/stroked 2.0lt AEG crank, 83mm supertech pistons, intergrated rods, ACL race brgs, Flowed large port head, Supertech valves, All ARP bolts, GTX2871r turbo, Tial wastegate, 3" pipewerx dp, REVO stage 3 tune, Direct port water meth, MORE TO COME!!! Ready to go racing
Owner of bndynamix ltd. BMW and mini specialist
184 Wallgate, Wigan
WN3 4AL
07966492823.

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: uprated camshafts in 20vt
« Reply #4 on: 28 August 2014, 08:13 »
Asked this myself before. As kent etc make after market cams with claimed good gains. But i think with the huge range of turbo related mods just seems no one bothers
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: uprated camshafts in 20vt
« Reply #5 on: 28 August 2014, 08:34 »
Your only looking at a 15-20BHP increase MAX from a cam, and for best part of £500 seems pointless
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline shaft69

  • I live here
  • *****
  • Posts: 1,790
Re: uprated camshafts in 20vt
« Reply #6 on: 28 August 2014, 09:54 »
Well my set up at mo
AUM engine
I.e forged H rods
Wossner low com pistons
Flowed head
BBT k418t turbo
Relevantless v4 pro manifold
600cc botch in
Water meth
As it stands good for around 360 ish bhp.


Logged
MK4 1.8t bored/stroked 2.0lt AEG crank, 83mm supertech pistons, intergrated rods, ACL race brgs, Flowed large port head, Supertech valves, All ARP bolts, GTX2871r turbo, Tial wastegate, 3" pipewerx dp, REVO stage 3 tune, Direct port water meth, MORE TO COME!!! Ready to go racing
Owner of bndynamix ltd. BMW and mini specialist
184 Wallgate, Wigan
WN3 4AL
07966492823.

Offline rockmonkey69

  • I live here
  • *****
  • Posts: 937
Re: uprated camshafts in 20vt
« Reply #7 on: 28 August 2014, 13:57 »
It's recommended to do some more head work to get the best out of aftermarket cams, most members with uprated cams are also running quite a lot of top end power. Dependent o the spec of the cams you ordered you stand to lose a lot of low end grunt which is fine if you gain a lot more top end. My uncle gained over 100 bhp top end but then he was making quite a lot of power to begin with, the cams allowed his engine to breathe that much better.
Logged

Offline shaft69

  • I live here
  • *****
  • Posts: 1,790
Re: uprated camshafts in 20vt
« Reply #8 on: 28 August 2014, 21:14 »
Head already flowed so all its getting so ain't coming off again. Knowing me when it's done be bored sell car!!
Logged
MK4 1.8t bored/stroked 2.0lt AEG crank, 83mm supertech pistons, intergrated rods, ACL race brgs, Flowed large port head, Supertech valves, All ARP bolts, GTX2871r turbo, Tial wastegate, 3" pipewerx dp, REVO stage 3 tune, Direct port water meth, MORE TO COME!!! Ready to go racing
Owner of bndynamix ltd. BMW and mini specialist
184 Wallgate, Wigan
WN3 4AL
07966492823.

Offline rockmonkey69

  • I live here
  • *****
  • Posts: 937
Re: uprated camshafts in 20vt
« Reply #9 on: 28 August 2014, 21:37 »
What valves/valve springs/retainers did you go for?
Logged
Pages: [1] 2
« previous next »