« previous next »
Pages: [1]

Author Topic: TIP & FMIC HELP!  (Read 1409 times)

Offline Mr-B

  • Not said much yet
  • **
  • Posts: 28
TIP & FMIC HELP!
« on: 29 May 2014, 00:23 »
Ok so i now have fitted the toyosports intercooler.. What a nightmare.. Pipes not fitting correctly. and i now fear there is a outlet valve that will need to be moved..

I bought a creation motorsports TIP but i have forgotted where everthing should go and what pipes should connect where. and i noticed some oil spraying out the pipe.

Im really stuck here as there is a small outlet from the intercooler pipe which i believe should connect to the n75 valve. as you can see dew to the possition of the outlet on the intercooler I have has to splice in a peice of pipe..

i really need some help on how to plumb all this back into the car. was far too quick pulling it all out now im lost..

many thanks in advance












« Last Edit: 29 May 2014, 00:26 by Mr-B »
Logged
Mk4 AGU 1.8T, JOM Coilovers, Creation Motorsports TIP, FMIC 2.5", WhiteLine ARB, WhiteLine Droplinks, Brembo Drilled & Grooved F/R, Forge Spacers, K&N Oil Filter, Forge Catch Tank, ECS Dogbone Mount, Custom Side Exit 2.5" (Work In Progress)

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: TIP & FMIC HELP!
« Reply #1 on: 29 May 2014, 12:36 »
Ok so on your TIP at the top you have 2 places to put the DV and the Hockey puck, and then you want to run the pipe that comes out the other side of the DV into the new intercooling pipe.
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline Mr-B

  • Not said much yet
  • **
  • Posts: 28
Re: TIP & FMIC HELP!
« Reply #2 on: 29 May 2014, 12:47 »
Thank you for the advice . So where should the pipe from the n75 valve go? I have the plastic bit pushed into one of the small pipes on the tip but there is still a rubber hose from it and no where to fit it.

Thanks
Logged
Mk4 AGU 1.8T, JOM Coilovers, Creation Motorsports TIP, FMIC 2.5", WhiteLine ARB, WhiteLine Droplinks, Brembo Drilled & Grooved F/R, Forge Spacers, K&N Oil Filter, Forge Catch Tank, ECS Dogbone Mount, Custom Side Exit 2.5" (Work In Progress)

Offline viperjsy

  • I live here
  • *****
  • Posts: 540
Re: TIP & FMIC HELP!
« Reply #3 on: 29 May 2014, 21:03 »
hi hope this helps
Logged
Pages: [1]
« previous next »