« previous next »
Pages: 1 [2] 3 4

Author Topic: R tech stage 2 on Friday  (Read 4665 times)

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: R tech stage 2 on Friday
« Reply #10 on: 21 May 2014, 12:47 »
Quote from: dom on 21 May 2014, 10:32
Quote from: Dalo Harkin on 21 May 2014, 08:28
I know the new OEM one is meant to be uprated but surely an OEM vs a Forge there is no question - I wouldn't risk it with a stage 2 - stage 1 you might get away with it

What is that based on?

Stage 1 I ran a standard actuator and it wasn't up to the job (unknown amount of time it had been on the car), upgraded to a forge (green spring) ran ok, needed a yellow spring for the stage 2 as it wouldn't keep it closed, so its based on my own events and circumstances nothing else.
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline baka

  • GTI forum regular
  • ***
  • Posts: 179
Re: R tech stage 2 on Friday
« Reply #11 on: 21 May 2014, 18:45 »
I thought the standard engine wanted 98RON anyway?

Putting 95RON in a stage 2 car? Madness I tell you!  :laugh:
Logged

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,172
  • Golf GTI 1.8T AGU
Re: R tech stage 2 on Friday
« Reply #12 on: 22 May 2014, 23:27 »
Higher octane fuel needs to be run for a few tank fulls to allow the ECU to adapt
Logged


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline Chris#101

  • I live here
  • *****
  • Posts: 827
Re: R tech stage 2 on Friday
« Reply #13 on: 24 May 2014, 13:01 »
Tesco 99' and methanol :evil:
Logged


          2003 1.8T: R-tech Live Cutom Stage 2 remap: N249 Bypass : Forge T.I.P : Forge 007p  : Forge Actuator, yellow spring : Toyosports F.M.I.C : Toyosports C.A.I :                                                                   PCV simplified - oil catch can : 42' Draft 3" turbo back non res exhaust system : Devils own W.M.I : 231bhp & 258lbs-ft

Offline andy68

  • Not said much yet
  • **
  • Posts: 52
Re: R tech stage 2 on Friday
« Reply #14 on: 24 May 2014, 15:33 »
Why put 95 RON in a stage 2 car, thought the idea behind stage 2 was to get the best out of your car. 95Ron OK for completely standard car and generic map, just my opinion.
Logged

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,172
  • Golf GTI 1.8T AGU
Re: R tech stage 2 on Friday
« Reply #15 on: 24 May 2014, 17:03 »
With 95 on a 98RON map it will retard the ignition timing creating a hotter mix and less power...
Logged


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline paultownsend

  • I live here
  • *****
  • Posts: 936
Re: R tech stage 2 on Friday
« Reply #16 on: 24 May 2014, 22:05 »
Full spec and results!
Logged

Offline james18t

  • Not said much yet
  • **
  • Posts: 63
Re: R tech stage 2 on Friday
« Reply #17 on: 24 May 2014, 22:29 »
I had mine stage 2 mapped by R-tech on 99 last year and they told me it's not safe for the engine to put 95 in anymore.
Logged

Offline paultownsend

  • I live here
  • *****
  • Posts: 936
Re: R tech stage 2 on Friday
« Reply #18 on: 25 May 2014, 14:19 »
James. If you don't mind me asking, what is your spec, and what results did you get at r tech?

The fuel debate is surely obvious. Vpower is the only option. Miles to tank it works the same. I got mine mapped on the ko3 on supermarket fuel. Big regret as now I use vpower, it's not at it's best. No logged through VCDS and not a sign of knock.  Ports and valves are nice and clean too.

If I have to use supermarket fuel I unplug the. N75
Logged

Offline james18t

  • Not said much yet
  • **
  • Posts: 63
Re: R tech stage 2 on Friday
« Reply #19 on: 25 May 2014, 17:48 »


Milltek 2.5" cat back with discreet tailpipes & 2.5" decat downpipe
PVC simplification (N249 delete, SAI delete) and oil catch can install
Forge 008p
Forge silicone TIP
Forge wastegate actuator
THS front mounted intercooler & high flow pancake pipe
VR6 clutch & G60 flywheel
Cold air induction kit with K&N cone filter
NGK Iridium spark plugs

They put a few extras on as well, like launch control, linear throttle and a switchable map with 5 different settings, it's pretty cool and had no problems at all in the year and a bit that I've had it.
Logged
Pages: 1 [2] 3 4
« previous next »