Cant find fog light wireing

[Shizzle]

please help just fitted new bumper with all the lights and new splitter and vento front end is on but i cant find the fog light wiring anywhere does any 1 know where it starts or comes from so i can see if it has been cut thank you.

[tweed]

It was a option.  So you need the loom and switch. Its all plug and play and been covered a few times. If you search im sure you'll find a guide

[Shizzle]

i have the switch in the car though just no wiring ill look into it thanks.

[Len]

We all have a switch in the car!
Its the headlight switch.
If you have the correct switch and at some time the wiring was there for the foglights then you should have a two position pull out on that switch.
First pull operates the rear fog lights only then if you pull again yo get both front and rears on.

If you dont have a twice pull switch your car was never fitted with foglights.

[tweed]

i have the switch in the car though just no wiring ill look into it thanks.

  of course you have one but as len says.

[Shizzle]

AH very help full il have a look later on thank you.

[thai-wronghorse]

This has been covered loads of time mate, if your car wasn't equipped with front foglights from new then it will require the appropriate headlight loom section that runs from the large round plug located above the radiator and connects to the lighting and horn.
All mk3's came with the necessary wiring behind the dash so inside the car all you need is the correct headlight switch.