R/v vac hose??

[james2]

It's a aum engine if that makes any diff

Get a picture up as yours will be the same as the pictures above

Edit : sorry saw your picture ,its still the same size so force it on . 

[james2]

This hose

The top tube looks lose so someones put a zip up tie on it, Get some new color silicon tubbing. 

[150+]

The metal pipe is twice the. Size of the nipple on the top of the DV...also I'm a little confused as to why dom's hose goes to under the inlet andone don't??

[dom]

I know, it's because I have removed my N249 and N112 valves

[james2]

On mine the hose from the top of the valve runs down to the inlet, the one from the side of the valve runs to the pipe you are referring to, I think that is 6mm ID, not 100% sure though.

You must of removed your metal tube that connects your dv to the inlet manifold. Its bolted to your engine with one rubber pipe off it to the inlet manifold and on the other end of the metal tube a rubber pipe to the top of the dv.

[james2]

I know, it's because I have removed my N249 and N112 valves

And your dip stick 

[dom]

Yeah, the hardlines and all that crap have gone. The dipstick is out because I was about to remove the sai and pipes

[150+]

This is how it was when I bought it..should I just get a longer piece of hose and leave it how it was

[150+]

Sorted just got a bit of 6mm Id hose fits lovely and no more turbo flutter