Door Handle Question

[Rockey5uk2001]

So my drivers side handle has been playing up

to sum it up you have to yank it to open it was planning on taking it apart over the next few days to have a poke around

anyone got any suggestions? or ideas?

[pickles]

sounds like your handle cable is a bit tight.

look here - http://forums.vwvortex.com/showthread.php?1015107

[Rockey5uk2001]

sounds like your handle cable is a bit tight.

look here - http://forums.vwvortex.com/showthread.php?1015107

Thanks pickles

[scarr89]

sounds like your handle cable is a bit tight.

look here - http://forums.vwvortex.com/showthread.php?1015107

Thanks pickles

Mine was doing that. That simple guide explains it all. Just make sure you don't undo the torx screw too much other wise it will fall into your door, which you will then have to take apart to get it!

[Rockey5uk2001]

fixed that problem now have 2 more 

First one - inside handle does not open the door!?!?!?!

Secondly -  When I open the door now the lock falls out!?!?!?!?


Help lol

[pickles]

your little hook thingy will have came off, your gona have to get the door card off and put it back on.
did you tighten the retaining screw back up lol.

[Rockey5uk2001]

Retaining screw tightened fully

[scarr89]

your little hook thingy will have came off, your gona have to get the door card off and put it back on.
did you tighten the retaining screw back up lol.

That. The hook thingy will become extremely apparent when you remove the door card.

[Rockey5uk2001]

Looks like I'm striping the lock down tomborrow

[Rockey5uk2001]

so turns out the locking ring had came off,

tried to put it on and what a PITA that was!

Now the bit that locks the ring has sheared

so heres my question

could I delock it?

would that be a problem?

or can I buy a replacement ring? if so where from1?!