Forge TIP has landed ...... Few questions again

[AD1.8T]

Right first off dodgy maf fitment


Now the new recirc location usually as you know this is under the cover so quite an extreme movement !

[Felton]

Your recirc is on the wrong way round ent it mate ? Mine goes the other way

[AD1.8T]

As far as im aware the only difference it makes is in the noise i ran it this way as before the vac pipe on the top was getting squished by the cover which caused problems, supose theres no excuse to put it the 'normal' way now though lol

[dom]

Taken from a thread on Vortex:



http://forums.vwvortex.com/showthread.php?5706249-diverter-valve-position

[Dalo Harkin]

I think when the DV is the "wrong" way it makes a horrendous chirp noise 

[AD1.8T]

Everyone mentions that but mine makes more of a chirp the normal way as it is now it makes a nice ... Wtttsssshhhhh??? 

[Nino]

Taken from a thread on Vortex:



http://forums.vwvortex.com/showthread.php?5706249-diverter-valve-position

Just reading that topic. This is very interesting. I have had a 17705 for a long time and I have changed almost everything I can think of. I wonder if I tired the reverse like AD1.8T if it would be any different.

[AD1.8T]

Do you use your engine cover ? When i had mine the other way the top vac pip was getting bent so no air could go through (like kinking a hose) and it made the turbo stall ever so slight and brought up the above code ! Worth a try or even just wip off the cover !

[Nino]

Do you use your engine cover ? When i had mine the other way the top vac pip was getting bent so no air could go through (like kinking a hose) and it made the turbo stall ever so slight and brought up the above code ! Worth a try or even just wip off the cover !

Nope prefer the look without it haven't used my cover for about 5 months. I have changed a heel of a lot too only thing I haven't dne is a catch can and n249 bypass but all hoses are now silicone and I got forge 007p and just put a brand new n75 "E" on

[AD1.8T]

Agu charge pipe maybe ?