Anyone else got a Clifford concept 50 Alarm installed?

[Deefadog]

If you have, i just want to compare notes, as i have a problem programing it using the feature select option and want to see if i am doing it wrong or there is a fault somewhere!

[Martz]

I have on mine. Not sure how to use. May just get it ripped out and get another installed.

What are they like anyway?

[Deefadog]

It seems really good, no false alarms or anything like that!

here is the owners manual if you don't have one - http://www.clifford.com/guides/ogs/concept50uk_owners.pdf

The problem i have is that i don't have a cherp sound, there is an option to disable this, but when i try and turn it back on it does not seem to work!

If you your vallet code (you should) this is what you do:

enter vallet code (e.g 1-2-3) -

Flip latch down once

flip it up and back to center

Flip latch down twice

flip it up and back to center

Flip latch down three times

flip it up

(you are now in your vallet mode/ alarm disabled)

imediaetly hold down the switch for 3 secs and release and you should be in feature select mode.

hit the switch 5 times down and this should turn the cherps on or off!

does it work for you?

[Martz]

Mine doesn't chirp, but I will try that.

[Deefadog]

Cheers!

let me know!

[Deefadog]

Did you try it Martz?

[Martz]

I need to buy a new remote. Mine works but has no case. I will when I get a replacement.

[Deefadog]

Cheers!

PM me when you

[monzablue16v]

A Clifford won't chirp if your backup siren battery has gone flat I know my concept 300 needs a new battery u can replace them but it's a bit of a P.I.T.A usually fail after a few years but they are really good alrms.

[Deefadog]

That could explain it!

The only time it has chirped is when i have disconnected or reconnected the battery!

Where is the battery? in the siren housing? and how do you replace it and from where?

Cheers