Mk3 Golf Rear Shock removal.....need some ideas....

[MereKat]

Can get one off fine, but the Nut inside the rear beam on the other is turning in its bracket...

What can i try to get it undone? Not much space in there to get a spanner into, and cant get enough leverage on a big flat screwdriver to try and hold it still.....

EDIT: This nut

[tweed]

Spray it with loads of plus gas or heat up the nut then undo the bolt with a impact gun

[danmusic24]

Snap the clip off and put a spanner on nut

[Gti_Jamo]

Like said remove the clip and get a spanner on it. Its the only way.

[kempie]

long nose pliers? gonna be a c*nt but only other thing that no ones has said?

[thai-wronghorse]

Reciprocating saw or oxy-acetylene?

[analogue_rogue]

weld nut to bracket with a large spot weld.. and turn while nut still hot.... if a spanner doesnt work obviously!

[Bellend]

I've always used a spanner....

[Screech16v]

Reciprocating saw or oxy-acetylene?

This or plasma 

[ttelracs]

I've always used a ring spanner too, 17 or 18mm I think.