front seat removal

[hardmonkeys]

removing the drivers seat to have a look at the airbag connectors, and its a different mech to the passenger...first of all it has 2 13mm bolts, instead of torx bolts...and second it doesnt come off the runners as easy...



does this look right...

as most know, i bought the car with no history...and the vagcom fault code has come up with

Address 15     -------------------------------------------------------
   Controller: 1J0 909 609   
   Component:  A AIRBAG VW3 SG   0002
   Coding: 00065
   Shop #: WSC 00028
3 Faults Found:
01280 - Airbag: Passenger Side: Disabled
            35-00 - -
01217 - Side Airbag Igniter: Driver Side (N199)
            32-10 - Resistance too High - Intermittent
00532 - Supply Voltage B+
            07-10 - Signal to Low - Intermittent

im just hoping the previous owner hasnt messed with things and bodged this seat with anything to get it bolted back in

any ideas?

thanks

[SI74]

same as mines.

[hardmonkeys]

brilliant...least I know

thanks

[Rhyso]

The seats should be bolted on and not with torx bolts 

[hardmonkeys]

Hmmm...this is what i had on the passenger side


the same as Mr Haynes