Fitting mk3 fog loom

[dan_thevdub_man]

Anyone able send me a link or talk me through how to fit the loom for the fogs on mk3 8vgti plz

[thai-wronghorse]

I'm assuming you're swapping the headlight loom section that runs along the top of the radiator / slam panel? It's quiet literally a case of twisting the big round connector block out and unclipping the wiring from it's metal retainers.
What are you stuck on exactly?

[sharki786]

Didnt all the gtis have fogs on them? It not hard.
Main 2 things you need is the front and rear fog headlight switch and loom. As said above. If you look inside of your engine bay by the rad there will be a big round block with wires. You just twist the plug and it co.e apart then you disconnect all the llugs that goes to the headlights indicators and horn and i think outside air temp. Fitti g is reversal and you will have 2 extra plugs (fog lights) after fitting check everything.

[thai-wronghorse]

No,  not all GTI's came equipped with front fog lights.  IIRC it was an optional extra on pre 96 mk3's.

[itavaltalainen]

you don't need the fog wiring loom.... can make it yourself.
all you need is a spade connector, wires, the two connectors for the fogs and of course the light switch.

pin 5 on the round connector is for fogs, gnd is not difficult to come by .... just go straight for battery terminal

[thai-wronghorse]

This said, I've got a spare loom in the shed if you're interested? 

[dan_thevdub_man]

all done lads thnks for the help