Standard alloy nuts

[Mark b]

Does anyone know what are the standard measurements are on wheel nuts length ect basically I went to get new alloys fitted today but my wheel nuts are not long enough so I need to buy new ones but don't know what are the right ones to get

The nuts I've got at the mo are black if that helps replacing the wheels on my sig pic

[Kobe]

M14 x 1.5 x 28mm long....... standard wheel nuts mate

[Mark b]

Cheers fella do you know what ones I'd need to fit aftermarket wheels need longer ones

[Wayne]

Cheers fella do you know what ones I'd need to fit aftermarket wheels need longer ones

Aftermarket alloys will need a different taper, standard bolts will be radius seat and are no good for the new alloys.

[Mark b]

cheers for the info i found a place near me that sell extended nut but would i need wheel spacers with the longer nuts

[Wayne]

cheers for the info i found a place near me that sell extended nut but would i need wheel spacers with the longer nuts

What alloys are you fitting, longer bolts should not be needed

[Mark b]

these ones mate they are 7j wide with an offset of 35 17" 5x100 i hope i dont need longer bolts hope this info means more to you then it does me
this is how much my bolts stick out the new wheel

[Wayne]

What make are the wheels.

[Mark b]

they are called cerberus ive never heard of them before hope this helps

[Wayne]

Never heard of them but your using the wrong bolts.

You need these: http://www.ebay.co.uk/itm/20-M14X1-5-TAPERED-ALLOY-WHEEL-BOLTS-FIT-VOLKSWAGEN-GOLF-MK5-/200767923589?pt=UK_Cars_Parts_Vehicles_Wheels_tyre_Trims_Trims_ET&hash=item2ebeb36585

Or maybe the same fit but a little longer.