Author Topic: Von Religion Zu Kult (Read 40118 times)

FraH2O · « **Reply #70 on:** 30 January 2013, 08:53 »

Time to refresh....

Some new necessary tools

And finally the sideskirt and the inside plstic wheel cover

10 - 15 days and the S2 will be ready for fitting.

FraH2O · « **Reply #71 on:** 30 January 2013, 08:55 »

LA3A coming soon...

FraH2O · « **Reply #72 on:** 30 January 2013, 08:56 »

Waiting the S2 and the new camber plates....i made my "mascott" to escort me to next treffen

And finally ready for final paint!

FraH2O · « **Reply #73 on:** 30 January 2013, 08:59 »

FraH2O · « **Reply #74 on:** 30 January 2013, 09:02 »

Ready for close with the black screw. for me are very good result

FraH2O · « **Reply #75 on:** 30 January 2013, 09:05 »

Finally i fitted the camber paltes (good machined from poland) They assure a -3° camber degree.

The fitting is so easy, but i found a trouble when i was fitting the second camber...

This spacer will make some trouble: the first is that lift the car, and the second is that i found 2 diffrernt wrong spacers for each camber

This is the trouble

There's a 1,3 cm of difference: th golf is higher on a side, but i check the problem when was time to screw the bolt on the damper thread

I solve the problem replacing the wrong apcers with these rebored bushes. They fitted perfectly wihout lifting the car.

The camber is made in 2 parts (upper and lower screwed with 8 bolts). I take the the lower to replace the rubber struts.

Loewering slow the car, and the camber will fit with any trouble.

Finish. Screw the 8 bolts. I place the camber with 90° degree from side spar. I make the right both camber with caliber.
These camber plate assure (with 0° degree at wheels) - 3° degree.