Milltek

[smoggy]

Hi,

I have a VWR exhaust which is made by milltek it has 100mm tips at the moment, fancy changing to 90mm anyone done this ?

Cheers

[Ginge 35Edition]

Pics?

[smoggy]

 
VWR badge now removed and replaced with standard gti badge.

[Y444GAR]

Your exhaust is hanging down, my milltek with 100mm tailpipes was tucked up into the diffuser. Dont think its the size of the tips thats the problem.

[smoggy]

Do you mean that its sitting too far out from the diffuser ?

[mkviken]

they do look like theyre sticking out loads

mine are the same tail pipes and i have mine flush with the diffuser.

also when the system heats up they will stick out even further



by the way you seem to have a gay pride flag on your number plate

[smoggy]

Looking better now i have just moved them back by a few inches  .....managed to snap the bolt off the clamp though, so had to use an exhaust u bracket to sort it.....

[ErikGTI]

I went from 100 mm Miltek to 90 mm Fox and the difference between this 90 mm and standard 80 mm is still HUGE.

I personally like the OEM look...you are still in doubt unless you spot a standard GTI exhaust 

Mind you in the end it is all a matter of taste....however on pics the 100 mm is a nobrainer 

[ErikGTI]

It looks like the 90 mm pipes stick out but that is not the case in fact I took care that they stick out as much/less as the original...meaning flush with the diffuser 

Btw the 90 mm Fox are welded in the same way the originals were welded (in fact it is now even better welded) the 90 mm ones are nearly twice the length of the original 80 mm ones (which from a side view appeared much more to be a small chrome collar)