1.8t electrics/clocks issue

[Screech16v]

I think you use a mk4 sensor. Im really not sure though tbh, because the box i got was Brads old box and was set yp for the conversion when i bought it. Was all plug and play

A mk4 gearbox sensor? I dont think it gets its signal from the gearbox as thats the speed sensor for the speedo 

[ant_gti]

maybe have a word with rubjonny on club gti,he done my looms for my conversion.he will defo know the answer

[Screech16v]

I just have mate im waiting on a reply ,thanks guys for your input so far 

[ant_gti]

vss wire connected to w1 on fusebox?

[Screech16v]

Isnt the vss for the speedo and not for the rev counter?

[ant_gti]

whoops my bad 

[Screech16v]

  

[Screech16v]

Right after many hours scouring and asking around  ,this is what i have found

AGU ecu pin6 for rpm signal  green/brown
Mk3 rpm wire to revcounter    white from old coil plug
So i will try this tomorrow.

[CJA321]

Cool. Atleast yours is going. Picked mine up from bodyshop two nightd ago and now wont start..... Alot of random electrical problems.... Fueling then not fueling... Was fine when i drove it there haha!!! But hes had it in the oven this time, before all panels were painted individually.... Old cars dont like ovens ocasionally... You got the ECU pinout for the AGU? Thats one diagram i seem to be missing.....

[Screech16v]

Argh that sucks mate hope it aint serious,try this
http://vagner.jeje.je/filmer/john-arne.overby/18T/AGU%20ECU%20pinout%202.pdf