Got new bike, again! Pg 11/12

[opel]

Nice work mate hope you have better luck this time.

[shepgti]

just use a heat gun/hairdryer to get the stickers off.  Buy a cover for it over night, out of sight out of mind kinda thing.

[RandomJord]

Looks good dude!

We can have 125 races!

[golfyste]

Looks good pal!
And fits nicely!
Decided if your going to put a low roof on there yet?

[golf-sib]

More piccies:








Thanks everyone, hopefully this lasts longer. Got a bike cover as well as another additional measure. Damn it feels slow compared to the yammy, feels really good low down in the revs. Also 5th gear is awful, no power what so ever I end up only using 4th max... need to see what can be done with the power issue, as it is around 1~2bhp less than the yammy and you can definitely feel the difference, its like going from 110bhp to 90bhp on a car 

Is EGR delete useful and again what about performance air filters?

[golfyste]

You don't want a cone dude, more likely to get wet and make it it out... Just get a panal filter and rejet it as bikes are normally jet lean from factory to help the emissions

[golf-sib]

You've lost me stew, I got the filter part but everything regarding carbs you've lost me on, I've never really dealt with carb engines, the only one I've ever rebuilt was a 33cc 2stroke engine and that was very simple, but i never touched the carb or anything to do with idle speed, jets etc... So please speak retarded hill billy english when talking about carbs 

[golfyste]

....jet too small....want bigger one 

[golf-sib]

You don't want a cone dude, more likely to get wet and make it it out... Just get a panal filter and rejet it as bikes are normally jet lean from factory to help the emissions

What Jet, this:



or this:



And how do they fit 

On a serious note, would stock jets not be fine if I adjusted the jets? Also any rule of thumbs of how big a jet(s) should get with upgrades, think the stock size is 93 or 95, I know if a 150cc kit it added people had success with a 102 size jet with a performance air filter.

[golfyste]

In all honesty I haven't a clue 
On a serious note I know nothing about the bike so if you wants to go big bore te. Try that with a exhaust and air filter
Check between the carbs and inlet etc for restricting washers that restrict te flow and also the airbox for any restriction like in the standard mk4 airbox then use the same jet as what people have had success with and may e take it to a specialist to get them to set it all up properly