Author Topic: what wheel bolt lenth do i need to fit 5mm forge spacers?  (Read 2009 times)

Offline Neg-1989

  • Not said much yet
  • **
  • Posts: 74
  • 1.8t agu stag 1map forge v008 www.derbydubs.co.uk
just won four 5mm forge wheel spacers off ebay for £12.24 inc post so what wheel bolt lenth do a need to fit these lads? i could go crack one off and see how long it is and add 5mm and order some but that means going out in the cold! haha thanks boys

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,172
  • Golf GTI 1.8T AGU
Re: what wheel bolt lenth do i need to fit 5mm forge spacers?
« Reply #1 on: 09 November 2012, 20:26 »
5mm is fine with standard length bolts


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline Steve_PD

  • Serious forum addict
  • *
  • Posts: 7,121
  • Cruising around in a Land Cruiser
Re: what wheel bolt lenth do i need to fit 5mm forge spacers?
« Reply #2 on: 09 November 2012, 20:28 »
32mm but will get away with buying 35mm
I often wonder why people never expect sarcastic comments from me - they're the only reason I speak...

Offline rockmonkey69

  • I live here
  • *****
  • Posts: 937
Re: what wheel bolt lenth do i need to fit 5mm forge spacers?
« Reply #3 on: 09 November 2012, 20:38 »
Standard thread length is 27mm so 32mm would be ideal as steve_pd said

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: what wheel bolt lenth do i need to fit 5mm forge spacers?
« Reply #4 on: 09 November 2012, 20:47 »
I ran 5mm spacers with standard bolts :wink:

Offline shaft69

  • I live here
  • *****
  • Posts: 1,790
Re: what wheel bolt lenth do i need to fit 5mm forge spacers?
« Reply #5 on: 09 November 2012, 21:09 »
I've 6mm spacers and standard bolt Deffo not long enough.
MK4 1.8t bored/stroked 2.0lt AEG crank, 83mm supertech pistons, intergrated rods, ACL race brgs, Flowed large port head, Supertech valves, All ARP bolts, GTX2871r turbo, Tial wastegate, 3" pipewerx dp, REVO stage 3 tune, Direct port water meth, MORE TO COME!!! Ready to go racing
Owner of bndynamix ltd. BMW and mini specialist
184 Wallgate, Wigan
WN3 4AL
07966492823.

Offline rockmonkey69

  • I live here
  • *****
  • Posts: 937
Re: what wheel bolt lenth do i need to fit 5mm forge spacers?
« Reply #6 on: 09 November 2012, 21:28 »
I suppose it's down to each individual, I mean you don't have to.

It's just if you don't then you run the risk, if you do then you sleep easier.

Offline Steve_PD

  • Serious forum addict
  • *
  • Posts: 7,121
  • Cruising around in a Land Cruiser
Re: what wheel bolt lenth do i need to fit 5mm forge spacers?
« Reply #7 on: 09 November 2012, 21:44 »
I ran 5mm spacers with and without longer bolts and with out they only screwed in 3 threads or 4.5mm :lipsrsealed: Deffo with longer bolts!
I often wonder why people never expect sarcastic comments from me - they're the only reason I speak...

Offline rockmonkey69

  • I live here
  • *****
  • Posts: 937
Re: what wheel bolt lenth do i need to fit 5mm forge spacers?
« Reply #8 on: 09 November 2012, 22:01 »
If that was me, it would have a very profound effect on how I would drive - W would never get out of 1st gear  :grin:
Definitely get longer wheel bolts, it's not alot of money for what is an integral part.

Offline Xtrhardcore

  • Here all the time
  • ****
  • Posts: 404
  • Mk3 Gti 2.0 8v MoreDoor
Re: what wheel bolt lenth do i need to fit 5mm forge spacers?
« Reply #9 on: 10 November 2012, 11:31 »
Sorry to thread jack - what about 20mm spacers?
Mk4 Gti - Gone but not forgotten!