k04-001 forge actuator

[km]

ordered a ko3 actuator, the 2 left holes line up. however, the further right one is nowhere near.

is there another bracket for k04-001 or will this have to do?



the rod seems to function fine so... help.

[rio_gti]

drill a new hole??

[DunnDeal12]

that doesn't even look like a 1.8t forge actuator in the second pic.

[km]

drill a new hole??

the turbo housing is at an angle with the bracket. but i'd rather the correct bracket if forge will supply it.

that doesn't even look like a 1.8t forge actuator in the second pic.

i've taken photos to compare the 2. appreciate it if someone with a k03 actuator could confirm mine's correct/wrong. or even better if you have one on your k04-001

[Prawny]

you have the new style forge actuator, they changed them recently.

I'd redrill the bracket, or contact forge and say it's wrong, they have a few different ones I understand.

[km]

a few? this is gonna be a challenge to get the right one. i'll give them a ring in the morning. thanks prawny

[littco]

Re drill the bracket. Seen this before as long as the rod comes out of the actuator square qhen fitted it'll be fine. These have been known to melt by the way.

[rio_gti]

Re drill the bracket. Seen this before as long as the rod comes out of the actuator square qhen fitted it'll be fine. These have been known to melt by the way.

what melts? 

[km]

 


contacted them this morning and they're sending another bracket