What injectors and fueling

[Scott-R]

For my setup "in sig" . Looking to make good power and hopefully take car to r-tech see if they can sort my map out.

[Wazzzer]

S3/TT injectors and fuel pump needed IMO

[Scott-R]

does anyone have this sort of setup with uprated injectors? any major risks with going this far?

[Reesy23]

I have a very similar set up and run S3/TT injectors and a 4far fpr.

Both of which are about to go up for sale if you are interested 

[Prawny]

it's an S3/TT/LCR turbo, so run S3/TT/LCR injectors my man.

You'll also need the MAf from the above too.

[Chris#101]

What K04 are you runinng reesy? got a project thread? i think im gonna k04-02* next. have you uprated your rods?

[Reesy23]

I do have a project thread but it's on Audi-sport.net.

My car is running the following:
K04-022? (Non EGT)
3" Downpipe and Decat
XS V2 Mani
2.75" Scorpion Decat back
Large port inlet mani
Large port Head
80mm TIP
S2000 Cone Filter
Welly cooler and 63mm pipes
Forged Rods
N/A Inlet Cam
Variable maps.

[turbokid23]

I do have a project thread but it's on Audi-sport.net.

Pop a link up then

[rio_gti]

I do have a project thread but it's on Audi-sport.net.

My car is running the following:
K04-022? (Non EGT)
3" Downpipe and Decat
XS V2 Mani
2.75" Scorpion Decat back
Large port inlet mani
Large port Head
80mm TIP
S2000 Cone Filter
Welly cooler and 63mm pipes
Forged Rods
N/A Inlet Cam
Variable maps.

What power u gettin from that little lot then?!!

[Reesy23]

Turbo is maxed out at 290bhp as it has done a few miles.

It was making that before the large port head and inlet mani went on though, so it would be seeing closer to 300 I think, possibly just over..