« previous next »
Pages: [1]

Author Topic: Nasty grinding type nose when I first start car  (Read 1264 times)

Offline Mk2_tel

  • Here all the time
  • ****
  • Posts: 373
Nasty grinding type nose when I first start car
« on: 27 October 2012, 16:39 »
It eventually goes but do t sound healthy.
I have a feeling it's from the pulleys or alternator?
Logged

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: Nasty grinding type nose when I first start car
« Reply #1 on: 27 October 2012, 17:50 »
Common fault bet its the starter motor.  :smiley:
Logged
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline Gti_Jamo

  • I live here
  • *****
  • Posts: 1,113
  • 1991 Corrado 1.8 G60
Re: Nasty grinding type nose when I first start car
« Reply #2 on: 27 October 2012, 17:58 »
Sould like the solenoid is sticking on in the starter motor. Common problem. Second hand starter wont cost much.
Logged


97' Mk3 Golf Gti 2.0 8v Rebuild Project http://www.golfgtiforum.co.uk/index.php?topic=208865.0

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: Nasty grinding type nose when I first start car
« Reply #3 on: 27 October 2012, 19:06 »
I would get a new one off ebay .I would not get a second hand one because it might have the same fault or might not last long before it does. Mine been making that stupid noise for over 2 years.  :evil:
Logged
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline mar_k

  • I live here
  • *****
  • Posts: 806
Re: Nasty grinding type nose when I first start car
« Reply #4 on: 27 October 2012, 22:36 »
I followed the guide thats on here or vortex, Can't remember which one now.
Basicly strip it down, clean and re grease. Its been good as gold since,
No need to buy a new one at all
Logged

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: Nasty grinding type nose when I first start car
« Reply #5 on: 28 October 2012, 15:40 »
But r-tech did theres and when they came to map my car you can hear the noise coming back.  :evil:
Logged
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline Mk2_tel

  • Here all the time
  • ****
  • Posts: 373
Re: Nasty grinding type nose when I first start car
« Reply #6 on: 28 October 2012, 17:18 »
It's once the car is already running after say 5secs a quick noise I thought it was alternator as it was smoking when I spray so eved40 on it?
Logged

Offline mar_k

  • I live here
  • *****
  • Posts: 806
Re: Nasty grinding type nose when I first start car
« Reply #7 on: 28 October 2012, 17:37 »
Anything hot will smoke when you spray wd40 on it,
I would keep wd40 away from any belts in the bay.

Its probably the secondary air pump,
There is a guide on how to repair that as well, The rivets that hold it together rust away
Logged
Pages: [1]
« previous next »